What are you looking for ? 

Custom Search


<< Previous Catalog - Home - Next Catalog >>



#14 << Previous Page - Page #1 - Next Page >> #2


4WD JK Programmer and Exhaust Performance PAK - PERFPAK12 4WD JK Intake and Exhaust Performance PAK - PERFPAK2 4WD TJ Intake and Exhaust Performance PAK - PERFPAK3 4WD JK Intake and Programmer Performance PAK - PERFPAK7 4WD TJ Intake and Exhaust Performance PAK - PERFPAK5 4WD JK Intake and Programmer Performance PAK - PERFPAK8 4WD Tow Bar Package - T-745K 4WD TJ Wrangler Hitch PAK - TJHPK2 4WD TJ Wrangler Hitch PAK - TJHPK1 4WD TJ Doorless Mirror PAK (Black) - TJMIRPKG 4WD Bubba Rope Ultimate Bundle - WINPAK10 4WD SuperWinch Recovery Bundle - WINPAK5 Artec Industries Lower Link Axle Brackets - BR1079 Artec High Clearance Shock Brackets - BR1049 Artec Industries Jeep Leaf Spring Perch (2 inch) - BR1090 Artec Industries Shock and Lower Link Axle Combo Brackets - BR1088 Artec Industries Jeep Leaf Spring Perch (2.5 inch) - BR1091 Artec Industries Ultimate Coil Bracket - BR1110 Artec Industries Ultimate Coil Bracket Kit - BR1111 Artec Industries Ultimate Coil Bracket - BR1112 Artec Industries Ultimate Coil Bracket - BR1113 Artec Industries Ultimate Coil Bracket - BR1114 Artec Industries TJ Weld On UCA Brackets For Low Pro Front Truss - BR1122 Artec Industries Ultimate Coil Bracket - BR1115 Artec Industries TJ Weld on UCA Brackets for Low Pro Front Truss - BR1123 Artec Industries TJ Weld on UCA Brackets for Low Pro Front Truss - BR1124 Artec Industries Weld on UCA Brackets for Low Pro Front Truss - BR1125 Artec Industries HD Rear Axle Upper Control Arm Brackets - BR1134 Artec Dana 44 Front Axle Truss - JK4401 Artec Front Lower Control Arm Skids (Bare Steel) - JK4404 Artec Industries Inner C Gussets - JK4405 Artec Heavy Duty Raised Tracbar Bracket - JK4406 Artec Heavy Duty Stock Tracbar Bracket - JK4407 Artec Industries JK Front Axle Armor Kit - JK4410 Artec Industries JK Front Axle Armor Kit - JK4411 Artec Industries Lower Control Arm Brackets - JK4412 Artec Dana 44 Rear Axle Truss - JK4420 Artec Dana 44 Rear Axle Truss - JK4421 Artec Industries Rear Upper Control Arm Brackets - JK4424 Artec Industries Rear Coil Perches and Retainers - JK4425 Artec Industries JK Rear Trackbar Bracket - JK4426 Artec Industries Rear Lower Control Arm Brackets with Skids - JK4427 Artec Industries Rear 3-Link Bracket for Rock Krawler Long Arm - JK4430 Artec Industries JK 1 Ton - Front Dana 60 Swap Kit with Daystar Bushings - JK6011 Artec Industries JK 1 Ton - Front Dana 60 Swap Kit with Currie Johnny Joints - JK6012 Artec Industries 3/4 Inch Rod End Kit - RE1203L Artec 7/8 Inch Wide Rod End Kit - RE1401L Artec Industries 3/4 Inch Rod End Kit - RE1203R Artec Industries Rod End Kit - RE1402L Artec 7/8 Inch Wide Rod End Kit - RE1402R Artec Dana 60 Full Hydro Ram Mount - RM6001 Artec Dana 60 Full Hydro Ram Mount - RM6002 Artec Dana 60 Full Hydro Ram Mount - RM6003 Artec Dana 60 Full Hydro Ram Mount - RM6005 Artec DIY Ram Mount - RM6007 Artec Bridge Upgrade Kit for Dana 60 - RM6030 Artec High Steer ARP Studs and Nuts Kit - RR-D60116K-2 Artec Full Hydro Tie Rod Kit - SK1001 Artec Industries Wide 3/4 Inch High Misalignment Spacers - SP1203 Artec 3/4 Inch High Misalignment Spacers - SP1202 Artec 1.0 Inch High Misalignment Spacers - SP1603 Artec 3/4 Inch High Misalignment Spacers - SP1201 Artec 1.0 Inch High Misalignment Spacers - SP1601 Artec Crossover Steering Kit - SK1401 Artec Industries Tube Adapter - TA1401L Artec Industries Tube Adapter - TA1402L Artec 7/8 Inch High Misalignment Spacers - SP1402 Artec Dana 60 Front Truss and Ram Mount - TR6030 Artec Dana 60 Front Truss - TR6031 Artec Dana 60 Front Truss - TR6033 Artec Dana 60 Front Truss and Ram Mount - TR6032 Artec Industries Low Profile Axle Truss - TR6050 Artec Industries Low Profile Ford Kingpin/Balljoint Front Truss - TR6051 Artec Industries Low Profile Front Truss For Ultimate Dana 60 - TR6056 Artec Dana 60 Rear Truss - TR6060 Artec Dana 60 Modular Rear Truss - TR6061 Artec Dana 80 Rear Truss - TR8001 Artec 8.8 Swap Kit with Truss - TR8801 Artec 8.8 Swap Kit with Truss - TR8802 Artec 8.8 Modular truss - TR8803 Artec 8.8 Truss Bridge - TR8804 Artec HP Dana 30 Front Axle Truss - XJ3001 Artec HP Dana 30 Front Axle Truss - XJ3003 American Trail Products Rock Slider - 31070002 American Trail Products Carrier Bearing Skid Plate - 31150001 American Trail Products Front Grab Handles (Silver) - 36070013S American Trail Products Front Grab Handles (Gray) - 36070013Y American Trail Products Rear Grab Handles (Green) - 36070015G American Trail Products Rear Grab Handles (Blue) - 36070015B American Trail Products Rear Grab Handles (Black) - 36070015K American Trail Products Rear Grab Handles (Orange) - 36070015O American Trail Products Rear Grab Handles (Red) - 36070015R American Trail Products Rear Grab Handles (Silver) - 36070015S American Trail Products Rear Grab Handles (Gray) - 36070015Y American Trail Products Footman Loop (Black) - 36070016K American Trail Products Footman Loop (Silver) - 36070016S American Trail Products Billet Footman Loop and Hood Snub Delete (Black) - 36070017K American Trail Products Billet Footman Loop and Hood Snub Delete (Silver) - 36070017S American Trail Products Exhaust Spacer - 36120001 American Trail Products D-Ring Shackle Tab DIY Weld-On Mount - 36120011



#14 << Previous Page - Page #1 - Next Page >> #2


PRODUCT CATALOG PAGES >> : 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 -
4WD JK Programmer and Exhaust Performance PAK - PERFPAK12

4WD JK Programmer and Exhaust Performance PAK - PERFPAK12
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 12-Current Wrangler JK, 2 & 4 Door;3.6L 6 cylinder engine;Bully Dog Triple Dog GT Gas Gauge Tuner;3 Power Settings;Dynomax Stainless Steel Axle Back Dual Exhaust System;2.5 inch inlet/3 inch outlet system;California Residents: WARNING The JK Programmer and Exhaust Performance PAK includes a Bully Dog Triple Dog GT Tuner and Dynomax Stainless Steel Axle Back Dual Exhaust System. The Bully Dog Triple Dog GT is an all in one downloader, monitor and tuning device. The GT Gas features multiple power settings with the ability to adjust drivetrain and user settings. In addition, the GT line features all of the same gauge/monitoring functions as well as the advanced Driving Coach software aiding drivers in maximizing their fuel economy. DynoMaxs head-turning, show-stopping performance and sound is backed by over 20 years of dyno-proven performance and engineering. Exhaust includes Super Turbo muffler assembly, clamps, and 5.5 inch overall length stainless steel slant cut tips. | | |
**** PRICE: 718.98 USD
Manufacturer : 4Wheel Drive Hardware
Tags: - .
SKU: 4WDPERFPAK12
isbn: PERFPAK12
upc:

Start of page
4WD JK Intake and Exhaust Performance PAK - PERFPAK2

4WD JK Intake and Exhaust Performance PAK - PERFPAK2
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 12-Current Wrangler JK, 2 & 4 Door;3.6L 6 cylinder engine;AIRAID MXP Series Cold Air Intake;SynthaFlow oiled filter;Dynomax Stainless Steel Axle Back Dual Exhaust System;2.5 inch inlet/3 inch outlet system;California Residents: WARNING The JK Intake and Exhaust Performance PAK includes an AIRAID MXP Series Cold Air Intake with SynthaFlow oiled filter and a Dynomax Stainless Steel Axle Back Dual Exhaust System. The Airaid Intake System uses nothing but the finest materials and production methods such as mandrel-formed, larger diameter tubing. Powder coating inside and out provides greater flow, protection against any harsh elements and improved eye-appeal. The SynthaFlow Filter is a Oiled Cotton/Synthetic blend, with multiple layers. This Made in the USA filter is the last that you will ever need to buy for your vehicle and is backed with AIRAIDs Lifetime No-Hassle Warranty. DynoMaxs head-turning, show-stopping performance and sound is backed by over 20 years of dyno-proven performance and engineering. Exhaust includes Super Turbo muffler assembly, clamps, and 5.5 inch overall length stainless steel slant cut tips. | | |
**** PRICE: 567.98 USD
Manufacturer : 4Wheel Drive Hardware
Tags: - .
SKU: 4WDPERFPAK2
isbn: PERFPAK2
upc:

Start of page
4WD TJ Intake and Exhaust Performance PAK - PERFPAK3

4WD TJ Intake and Exhaust Performance PAK - PERFPAK3
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 97-00 Wrangler TJ;4.0L 6 cylinder engine;AIRAID Cool Air Dam Intake System;SynthaMax filter - uses no oil;Dynomax Aluminized Cat Back Exhaust System;Inlet/outlet size: 2.25 inches;California Residents: WARNING The TJ Intake and Exhaust Performance PAK includes an AIRAID Cool Air Dam Intake System SynthaMax no oil filter and a Dynomax Aluminized Cat Back Exhaust System. The Airaid Intake System uses nothing but the finest materials and production methods such as mandrel-formed, larger diameter tubing. Powder coating inside and out provides greater flow, protection against any harsh elements and improved eye-appeal. The SynthaMax Option is a No-Hassle, Non-Oiled, 100% Synthetic media that boasts a 99%+ Efficiency rating. From the moment you open the box you will see that the SynthaMax has a unique appearance for a synthetic filter, a Performance Red colorfast finish that will not fade over the years. This new filter looks so much like its SynthaFlow cousin that we have marked it with a proud SynthaMax, Do Not Oil for easy identification. The SynthaMax Non-Oiled media means cleaning is as easy as Wash it, Let it Dry, and Re-Install. This Made in the USA filter is the last that you will ever need to buy for your vehicle and is backed with AIRAIDs Lifetime No-Hassle Warranty. The Dynomax Exhaust upgrades your factory exhaust with a system that features the most popular muffler in motorsports history- the Super Turbo. Dyno-max Cat Back Systems utilize mandrel bent pipes which increases flow more than 35% compared to the stock serrated bent pipes. Pipes follow OE routing precisely so they fit properly the first time. Pipes and mufflers are all-aluminized with a stainless steel exhaust tip. This kit includes the required muffler clamps and replaces the stock tailpipe and muffler. The tailpipe attaches to the stock rubber isolators. *May not work with aftermarket oversize gas tanks or hitches. | | |
**** PRICE: 576.98 USD
Manufacturer : 4Wheel Drive Hardware
Tags: - .
SKU: 4WDPERFPAK3
isbn: PERFPAK3
upc:

Start of page
4WD JK Intake and Programmer Performance PAK - PERFPAK7

4WD JK Intake and Programmer Performance PAK - PERFPAK7
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 07-11 Wrangler JK, 2 & 4 Door;3.8L 6 cylinder engine;AIRAID Cool Air Dam Intake System;SynthaMax filter - uses no oil;Bully Dog Triple Dog GT Gas Gauge Tuner;3 Power Settings;California Residents: WARNING The JK Intake and Exhaust Performance PAK includes a AIRAID Cool Air Dam Intake System with SynthaMax no oil filter and a Bully Dog Triple Dog GT Gas Gauge Tuner. The Airaid Intake System uses nothing but the finest materials and production methods such as mandrel-formed, larger diameter tubing. Powder coating inside and out provides greater flow, protection against any harsh elements and improved eye-appeal. The SynthaMax Filter is a No-Hassle, Non-Oiled, 100% Synthetic media that boasts a 99%+ Efficiency rating. From the moment you open the box you will see that the SynthaMax has a unique appearance for a synthetic filter, a Performance Red colorfast finish that will not fade over the years. This new filter looks so much like its SynthaFlow cousin that we have marked it with a proud SynthaMax, Do Not Oil for easy identification. The SynthaMax Non-Oiled media means cleaning is as easy as Wash it, Let it Dry, and Re-Install. This Made in the USA filter is the last that you will ever need to buy for your vehicle and is backed with AIRAIDs Lifetime No-Hassle Warranty. The Bully Dog Triple Dog GT is an all in one downloader, monitor and tuning device. The GT Gas features multiple power settings with the ability to adjust drivetrain and user settings. In addition, the GT line features all of the same gauge/monitoring functions as well as the advanced Driving Coach software aiding drivers in maximizing their fuel economy. | | |
**** PRICE: 847.98 USD
Manufacturer : 4Wheel Drive Hardware
Tags: - .
SKU: 4WDPERFPAK7
isbn: PERFPAK7
upc:

Start of page
4WD TJ Intake and Exhaust Performance PAK - PERFPAK5

4WD TJ Intake and Exhaust Performance PAK - PERFPAK5
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 97-00 Wrangler TJ;2.5L 4 cylinder engine;AIRAID Cool Air Dam Intake System;SynthaMax filter - uses no oil;Dynomax Aluminized Cat Back Exhaust System;Inlet/outlet size: 2.25 inches;California Residents: WARNING The TJ Intake and Exhaust Performance PAK includes an AIRAID Cool Air Dam Intake System SynthaMax no oil filter and a Dynomax Aluminized Cat Back Exhaust System. The Airaid Intake System uses nothing but the finest materials and production methods such as mandrel-formed, larger diameter tubing. Powder coating inside and out provides greater flow, protection against any harsh elements and improved eye-appeal. The SynthaMax Option is a No-Hassle, Non-Oiled, 100% Synthetic media that boasts a 99%+ Efficiency rating. From the moment you open the box you will see that the SynthaMax has a unique appearance for a synthetic filter, a Performance Red colorfast finish that will not fade over the years. This new filter looks so much like its SynthaFlow cousin that we have marked it with a proud SynthaMax, Do Not Oil for easy identification. The SynthaMax Non-Oiled media means cleaning is as easy as Wash it, Let it Dry, and Re-Install. This Made in the USA filter is the last that you will ever need to buy for your vehicle and is backed with AIRAIDs Lifetime No-Hassle Warranty. The Dynomax Exhaust upgrades your factory exhaust with a system that features the most popular muffler in motorsports history- the Super Turbo. Dyno-max Cat Back Systems utilize mandrel bent pipes which increases flow more than 35% compared to the stock serrated bent pipes. Pipes follow OE routing precisely so they fit properly the first time. Pipes and mufflers are all-aluminized with a stainless steel exhaust tip. This kit includes the required muffler clamps and replaces the stock tailpipe and muffler. The tailpipe attaches to the stock rubber isolators. *May not work with aftermarket oversize gas tanks or hitches. | | |
**** PRICE: 559.98 USD
Manufacturer : 4Wheel Drive Hardware
Tags: - .
SKU: 4WDPERFPAK5
isbn: PERFPAK5
upc:

Start of page
4WD JK Intake and Programmer Performance PAK - PERFPAK8

4WD JK Intake and Programmer Performance PAK - PERFPAK8
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 12-Current Wrangler JK, 2 & 4 Door;3.6L 6 cylinder engine;AIRAID MXP Series Cold Air Intake;SynthaFlow oiled filter;Bully Dog Triple Dog GT Gas Gauge Tuner;3 Power Settings;California Residents: WARNING The JK Intake and Exhaust Performance PAK includes an AIRAID MXP Series Cold Air Intake with SynthaFlow oiled filter and a Bully Dog Triple Dog GT Gas Gauge Tuner. The Airaid Intake System uses nothing but the finest materials and production methods such as mandrel-formed, larger diameter tubing. Powder coating inside and out provides greater flow, protection against any harsh elements and improved eye-appeal. The SynthaFlow Filter is an Oiled Cotton/Synthetic blend, with multiple layers. This Made in the USA filter is the last that you will ever need to buy for your vehicle and is backed with AIRAIDs Lifetime No-Hassle Warranty. The Bully Dog Triple Dog GT is an all in one downloader, monitor and tuning device. The GT Gas features multiple power settings with the ability to adjust drivetrain and user settings. In addition, the GT line features all of the same gauge/monitoring functions as well as the advanced Driving Coach software aiding drivers in maximizing their fuel economy. | | |
**** PRICE: 874.98 USD
Manufacturer : 4Wheel Drive Hardware
Tags: - .
SKU: 4WDPERFPAK8
isbn: PERFPAK8
upc:

Start of page
4WD Tow Bar Package - T-745K

4WD Tow Bar Package - T-745K
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Tow your Jeep without a full size trailer;Includes adjustable tow bar, safety chains, magnetic auxiliary tow lights and a hitch ball;Drilling required to mount tow bar brackets;California Residents: WARNING Tow your Jeep without having to use that full size trailer. Tow bar adjusts from 26 to 41 in width, includes 2 heavy-duty coupler & universal bumper brackets, drilling required on front bumper to install brackets. Kit includes Curt Adjustable tow bar, Curt safety chains, Curt Magnetic Auxiliary towing lights and a Tow Ready hitch ball. | | |
**** PRICE: 272.96 USD
Manufacturer : 4Wheel Drive Hardware
Tags: - .
SKU: 4WDT-745K
isbn: T-745K
upc:

Start of page
4WD TJ Wrangler Hitch PAK - TJHPK2

4WD TJ Wrangler Hitch PAK - TJHPK2
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 05-06 Wrangler TJ/LJ;Includes class III receiver hitch, trailer wiring harness, pin and clip, 2 drop receiver and 2x1 receiver ball;Class 3 receivers offer a maximum 4.000 lbs. GTW, 400 lb. TW;Up to 25% off;California Residents: WARNING The most complete package available. Once installed all you need to do is load up the trailer. The New Curt Class 3 Series receiver hitches are the right size for todays hottest selling vehicles. Class 3 receivers are built with a 2 square receiver tube to accommodate many popular hitch-mounted accessories. Class 3 receivers offer a maximum 4.000 lb. Gross Trailer Weight (GTW) rating. Class 3 receivers are in the Class III weight category but at a Class II price. Comes with a Gloss Black Powder Coat finish. 4,000 GTW, 400 LB. TW. | | |
**** PRICE: 223.44 USD
Manufacturer : Genuine Packages
Tags: - .
SKU: 4WDTJHPK2
isbn: TJHPK2
upc:

Start of page
4WD TJ Wrangler Hitch PAK - TJHPK1

4WD TJ Wrangler Hitch PAK - TJHPK1
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 98-04 Wrangler TJ/LJ;Includes class III receiver hitch, trailer wiring harness, pin and clip, 2 drop receiver and 2x1 receiver ball;Class 3 receivers offer a maximum 4.000 lbs. GTW, 400 lb. TW;Up to 25% off;California Residents: WARNING The most complete package available. Once installed all you need to do is load up the trailer. The New Curt Class 3 Series receiver hitches are the right size for todays hottest selling vehicles. Class 3 receivers are built with a 2 square receiver tube to accommodate many popular hitch-mounted accessories. Class 3 receivers offer a maximum 4.000 lb. Gross Trailer Weight (GTW) rating. Class 3 receivers are in the Class III weight category but at a Class II price. Comes with a Gloss Black Powder Coat finish. 4,000 GTW, 400 LB. TW. | | |
**** PRICE: 219.44 USD
Manufacturer : Genuine Packages
Tags: - .
SKU: 4WDTJHPK1
isbn: TJHPK1
upc:

Start of page
4WD TJ Doorless Mirror PAK (Black) - TJMIRPKG

4WD TJ Doorless Mirror PAK (Black) - TJMIRPKG
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 97-06 Wrangler TJ/LJ;Black;This PAK eliminates removing mirrors from the doors;Stay legal when doors are off;Sold as a pair;California Residents: WARNING Stay legal when your doors are off with the 4Wheel Drive Hardware TJ Mirror PAK. The kit includes (two) mirrors and (two) mirror brackets. The mirrors are replacements for factory side mirrors and a direct replacement. The mirror brackets attach to the vehicles windshield hinges using existing bolt holes. No drilling required for installation. All mounting hardware is included. | Black | |
**** PRICE: 127.98 USD
Manufacturer : 4Wheel Drive Hardware
Tags: - .
SKU: 4WDTJMIRPKG
isbn: TJMIRPKG
upc:

Start of page
4WD Bubba Rope Ultimate Bundle - WINPAK10

4WD Bubba Rope Ultimate Bundle - WINPAK10
Business & Industrial > Material Handling > Lifts & Hoists > Winches
ATG_SKU_4WD_data_feed
Description : 32,000 lbs. breaking strength;Neon green;7/16 inch rope diameter;Flexible and wraps around difficult pulling points;7/8 inch x 30 black and red recovery rope;28,600 lbs.capacity;2 inch x 30 black recovery rope;131,500 lbs. capacity;California Residents: WARNING Gator-Jaw shackles are made from Plasma rope which is the highest strength synthetic rope available. Gator-Jaw shackles are stronger than comparable steel shackles. These shackles will not rust and are so light they float. Towing applications include: 4x4 off-road, agriculture & mining equipment and various marine uses. The Gator-Jaw shackle can be washed off with water and air dried. While Gator-Jaw fibers are stronger than steel they are susceptible to wear and cutting. Always inspect shackle before use for excess wear, cutting, or worn and frayed areas. The original strap buster! Use this recovery rope for 4x4 trucks, Jeeps, and SUVs. Made from the highest quality nylon, this powerful rope is the best choice for recovery and towing, with a breaking strength of 28,600 pounds. Length is determined when rope is under load. | | |
**** PRICE: 1074.07 USD
Manufacturer : 4Wheel Drive Hardware
Tags: - .
SKU: 4WDWINPAK10
isbn: WINPAK10
upc: 700006926551

Start of page
4WD SuperWinch Recovery Bundle - WINPAK5

4WD SuperWinch Recovery Bundle - WINPAK5
Business & Industrial > Material Handling > Lifts & Hoists > Winches
ATG_SKU_4WD_data_feed
Description : 9,500 lbs. winch;Remote included;Aluminum Fairlead;Pair of black D-rings;4.75 Ton weight rating;2 inch x 6 foot recovery strap;15,600 lbs. capacity;California Residents: WARNING The Entry Level waters are dark, full of bottom feeders and are soon to be consumed by a winch series destined to raise the bar for the winch marketplace! Superwinch is redefining the entry level winch market with the new Tiger Shark Series with Standard Issue features and benefits designed for the enthusiast-level consumer. Created from everything we have already learned over the past 40+ years, the Tiger Shark brings unmatched functionality, quality and value. Smittybilts D-Ring Shackles are the perfect vehicle recovery rigging point. These universal fit shackles will work perfectly with Smittybilts XRC & SRC Series Bumpers as well as any other brand of off-road bumper. Finished in black or zinc, Smittybilts D-Rings will provide you with years of reliable service out on the trail. The Tree-Saver Strap is designed to aid you in your winching without damaging the trees with your cable. | | |
**** PRICE: 1137.97 USD
Manufacturer : 4Wheel Drive Hardware
Tags: - .
SKU: 4WDWINPAK5
isbn: WINPAK5
upc: 700006926501

Start of page
Artec Industries Lower Link Axle Brackets - BR1079

Artec Industries Lower Link Axle Brackets - BR1079
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited;22 degree angle from 90 degrees;3.5 axle tube diameter;2.625 mounting width with 9/16 bolt hole for common sized cartridge joints;Made from 1/4 thick boxed steel plate for strength and impact resistance;Grease fitting access on top to allow easy maintenance of your most abused joint;Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint;California Residents: WARNING With our new line of brackets, we want to introduce a better looking product that has that custom one-off look AND solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Below are some of the highlights for this particular bracket that set it apart from all the others. | | |
**** PRICE: 59.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1079
isbn: BR1079
upc: 816791026040

Start of page
Artec High Clearance Shock Brackets - BR1049

Artec High Clearance Shock Brackets - BR1049
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Universal application;Bare steel;Made from 1/4 inch thick steel;Sold As A Pair;California Residents: WARNING This heavy bracket is designed to take serious abuse and replace your worn shock brackets. This bracket requires welding to install. | | |
**** PRICE: 55.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1049
isbn: BR1049
upc: 816791020567

Start of page
Artec Industries Jeep Leaf Spring Perch (2 inch) - BR1090

Artec Industries Jeep Leaf Spring Perch (2 inch) - BR1090
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Designed for 2 inch wide leaf springs and 2.5 inch - 2.75 inch diameter axle tube;Wide mounting surface to reduce axle wrap;3 Holes for centering pin to dial in axle placement;Variable axle tube diameter, just grind off little tabs for larger tube diameter;Current notch fits 2.5 - 2.75 inch axle tubes;Hardware is not included since leaf packs can vary in thickness;For offroad use only;California Residents: WARNING Replace broken or work out factory perches, or use for an axle swap. | | |
**** PRICE: 17.50 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1090
isbn: BR1090
upc:

Start of page
Artec Industries Shock and Lower Link Axle Combo Brackets - BR1088

Artec Industries Shock and Lower Link Axle Combo Brackets - BR1088
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Lower link angle: 22 deg;Made from 1/4 thick boxed steel plate for strength and impact resistance;Sold as a pair;Includes:Lower link brackets and shock tabs for driver and passenger sideUse with any shock mounting width from 1.25-1.6;2.625 mounting width with 9/16 bolt hole for common sized Cartridge Joints;Can be drilled out to larger hole size for 1.25 rod ends with spacers;Grease fitting access on top to allow easy maintenance of your most abused joint;Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint;This kit requires general welding and fabrication skills;California Residents: WARNING Is space tight on your axle and you can't mount your shocks? Or do you need to mount the shocks offset off the axle tube. This combo bracket takes our best selling Lower Link Axle Brackets and combines them with our new Lower Link Shock Tabs to allow you to mount your shocks offset from the axle tube. These tabs work on all three angles of lower link so you don't have to have some big specialty combo bracket that looks goofy and is bigger than a normal link bracket. These tabs also allow you to use different shock mounting widths so you don't have to spend time modifying either the bracket or the shocks to fit within a preset bracket width. Available at 0, 10 or 22* degree angled Lower Axle Link Brackets. The STYLE of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off. | | |
**** PRICE: 79.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1088
isbn: BR1088
upc:

Start of page
Artec Industries Jeep Leaf Spring Perch (2.5 inch) - BR1091

Artec Industries Jeep Leaf Spring Perch (2.5 inch) - BR1091
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Designed for 2 inch wide leaf springs and 2.5 inch - 2.75 inch diameter axle tube;Wide mounting surface to reduce axle wrap;3 Holes for centering pin to dial in axle placement;Variable axle tube diameter, just grind off little tabs for larger tube diameter;Current notch fits 2.5 - 2.75 inch axle tubes;Hardware is not included since leaf packs can vary in thickness;For offroad use only;Sold as a pair;California Residents: WARNING Replace broken or work out factory perches, or use for an axle swap. | | |
**** PRICE: 17.50 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1091
isbn: BR1091
upc:

Start of page
Artec Industries Ultimate Coil Bracket - BR1110

Artec Industries Ultimate Coil Bracket - BR1110
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 0 degree lower link bracket angle;3.0 inch axle tube diameter;Brackets are made from 3/16 inch thick mild steel;1/4 inch thick for strength and impact resistance;Precision CNC cut and bent for great fitment;California Residents: WARNING With our new line of brackets, we want to introduce a better looking product that has that custom one-off look AND solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Below are some of the highlights for this particular bracket that set it apart from all the others. | | |
**** PRICE: 215.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1110
isbn: BR1110
upc:

Start of page
Artec Industries Ultimate Coil Bracket Kit - BR1111

Artec Industries Ultimate Coil Bracket Kit - BR1111
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : Coil bucket, Shock bracket and link mount all in one;3.0 axle tube diameter;10 degree lower link bracket;3/16 thick mild steel coil and shock brackets, 1/4 thick LCA brackets for strength and impact resistance;Coil correction STAMPED into coil bucket for a flush standing coil;Bump formed Bumpstop pad with threaded retainer hardware allows you to use your factory style upper bumpstops;Adjustable shock mounting width;Sold as a pair;California Residents: WARNING Artec Industries new line of brackets, introduce a better looking product that has that custom one-off look AND solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Below are some of the highlights for this particular bracket that set it apart from all the others. | | |
**** PRICE: 223.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1111
isbn: BR1111
upc:

Start of page
Artec Industries Ultimate Coil Bracket - BR1112

Artec Industries Ultimate Coil Bracket - BR1112
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 22 degree lower link bracket angle;3.0 inch axle tube diameter;Brackets are made from 3/16 inch thick mild steel;1/4 inch thick for strength and impact resistance;Precision CNC cut and bent for great fitment;California Residents: WARNING With our new line of brackets, we want to introduce a better looking product that has that custom one-off look AND solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Below are some of the highlights for this particular bracket that set it apart from all the others. | | |
**** PRICE: 219.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1112
isbn: BR1112
upc:

Start of page
Artec Industries Ultimate Coil Bracket - BR1113

Artec Industries Ultimate Coil Bracket - BR1113
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 0 degree lower link bracket angle;3.5 inch axle tube diameter;Brackets are made from 3/16 inch thick mild steel;1/4 inch thick for strength and impact resistance;Precision CNC cut and bent for great fitment;California Residents: WARNING With our new line of brackets, we want to introduce a better looking product that has that custom one-off look AND solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Below are some of the highlights for this particular bracket that set it apart from all the others. | | |
**** PRICE: 220.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1113
isbn: BR1113
upc:

Start of page
Artec Industries Ultimate Coil Bracket - BR1114

Artec Industries Ultimate Coil Bracket - BR1114
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 10 degree lower link bracket angle;3.5 inch axle tube diameter;Brackets are made from 3/16 inch thick mild steel;1/4 inch thick for strength and impact resistance;Precision CNC cut and bent for great fitment;California Residents: WARNING With our new line of brackets, we want to introduce a better looking product that has that custom one-off look AND solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Below are some of the highlights for this particular bracket that set it apart from all the others. | | |
**** PRICE: 228.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1114
isbn: BR1114
upc:

Start of page
Artec Industries TJ Weld On UCA Brackets For Low Pro Front Truss - BR1122

Artec Industries TJ Weld On UCA Brackets For Low Pro Front Truss - BR1122
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Made from 1/4 inch thick steel;Daystar Bushings UCA mount style;7/16 inch bolt size;The center hole of these brackets is 8.5 inches from axle center-line;California Residents: WARNING These UCA brackets are intended to mount on the top of our new Low Profile Front Trusses and give you the same style of control arm mounting found on Jeep JK's and TJ's. The new trusses have an etched line in the top that acts as a center-line for the joint in this kit and lets you locate it at the correct location and angle (see pic 4). Made from 1/4 thick steel and gusseted on the taller mount, these brackets are basically the same as what we've been using on our revolutionary JK and TJ 1 ton swap kits for years. | | |
**** PRICE: 93.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1122
isbn: BR1122
upc:

Start of page
Artec Industries Ultimate Coil Bracket - BR1115

Artec Industries Ultimate Coil Bracket - BR1115
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 22 degree lower link bracket angle;3.5 inch axle tube diameter;Brackets are made from 3/16 inch thick mild steel;1/4 inch thick for strength and impact resistance;Precision CNC cut and bent for great fitment;California Residents: WARNING With our new line of brackets, we want to introduce a better looking product that has that custom one-off look AND solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. | | |
**** PRICE: 224.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1115
isbn: BR1115
upc:

Start of page
Artec Industries TJ Weld on UCA Brackets for Low Pro Front Truss - BR1123

Artec Industries TJ Weld on UCA Brackets for Low Pro Front Truss - BR1123
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Made from 1/4 inch thick steel;Daystar Bushings UCA mount style;1/2 inch bolt size;The center hole of these brackets is 8.5 inches from axle center-line;California Residents: WARNING These UCA brackets are intended to mount on the top of our new Low Profile Front Trusses and give you the same style of control arm mounting found on Jeep JK's and TJ's. The new trusses have an etched line in the top that acts as a center-line for the joint in this kit and lets you locate it at the correct location and angle (see pic 4). Made from 1/4 thick steel and gusseted on the taller mount, these brackets are basically the same as what we've been using on our revolutionary JK and TJ 1 ton swap kits for years. | | |
**** PRICE: 89.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1123
isbn: BR1123
upc:

Start of page
Artec Industries TJ Weld on UCA Brackets for Low Pro Front Truss - BR1124

Artec Industries TJ Weld on UCA Brackets for Low Pro Front Truss - BR1124
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Made from 1/4 inch thick steel;Currie Johnny Joints UCA mount style;7/16 inch bolt size;The center hole of these brackets is 8.5 inches from axle center-line;California Residents: WARNING These UCA brackets are intended to mount on the top of our new Low Profile Front Trusses and give you the same style of control arm mounting found on Jeep JK's and TJ's. The new trusses have an etched line in the top that acts as a center-line for the joint in this kit and lets you locate it at the correct location and angle (see pic 4). Made from 1/4 thick steel and gusseted on the taller mount, these brackets are basically the same as what we've been using on our revolutionary JK and TJ 1 ton swap kits for years. | | |
**** PRICE: 154.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1124
isbn: BR1124
upc:

Start of page
Artec Industries Weld on UCA Brackets for Low Pro Front Truss - BR1125

Artec Industries Weld on UCA Brackets for Low Pro Front Truss - BR1125
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Made from 1/4 inch thick steel;Currie Johnny Joints UCA mount style;1/2 inch bolt size;The center hole of these brackets is 8.5 inches from axle center-line;California Residents: WARNING These UCA brackets are intended to mount on the top of our new Low Profile Front Trusses and give you the same style of control arm mounting found on Jeep JK's and TJ's. The new trusses have an etched line in the top that acts as a center-line for the joint in this kit and lets you locate it at the correct location and angle (see pic 4). Made from 1/4 thick steel and gusseted on the taller mount, these brackets are basically the same as what we've been using on our revolutionary JK and TJ 1 ton swap kits for years. | | |
**** PRICE: 154.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1125
isbn: BR1125
upc:

Start of page
Artec Industries HD Rear Axle Upper Control Arm Brackets - BR1134

Artec Industries HD Rear Axle Upper Control Arm Brackets - BR1134
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : For 3.5 inch diameter axle;Not for factory Dana 44 in Wrangler JKs;OEM 2.4 inch mounting width fits factory and aftermarket control arms;Bracket wraps around axle tube more than factory for additional weld surface area, which significantly reduces the chance the bracket can rip off;Made from 1/4 inch thick boxed steel plate for strength;Use 18mm socket on factory brake flange to line up bracket;The STYLE of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off;NOTE: This bracket requires welding to the axle and removal of the factory bracket. Welding should be done by a competent welder;California Residents: WARNING

Beef up your rear axle UCA brackets on your 2007-2017 Jeep JK (All 4x4 models). Do you have bent and mangled factory upper control arm brackets? Its no surprise since they are practically made of sheet-metal. These Heavy Duty brackets replace the factory brackets so you'll never have to worry about ripping off a bracket again.
Features:

  • OEM 2.4 inch mounting width fits factory and aftermarket control arms
  • Bracket wraps around axle tube more than factory for additional weld surface area, which significantly reduces the chance the bracket can rip off.
  • Made from 1/4 inch thick boxed steel plate for strength
  • Use 18mm socket on factory brake flange to line up bracket
  • The Style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.
  • Diameter: 3.5 Inch
  • Sold As: Pair

Note: This bracket requires welding to the axle and removal of the factory bracket. Welding should be done by a competent welder and Artec Industries is not liable for incorrect installation or improper welding.

| | |
**** PRICE: 59.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IBR1134
isbn: BR1134
upc:

Start of page
Artec Dana 44 Front Axle Truss - JK4401

Artec Dana 44 Front Axle Truss - JK4401
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 07-Current Wrangler JK, 2 & 4 Door;Works on Dana 44 front axle;Made from 1/4 and .130 mild steel;Provides valuable reinforcement to a notoriously week area;Truss spans length of long side and short side;California Residents: WARNING This heavy duty and light weight truss system and armor is designed to take serious abuse and reinforce your front Dana 44 JK axle. The 1/4 thick truss top and 10Ga. gusseting incorporates a unique design to strengthen both axle tubes, not just the long tube (commonly found in other designs). The precision cut and formed components of this setup ensure a hassle-free installation. This kit requires general welding and fabrication skills including welding to the cast center section. This kit is intended for vehicles with at least minor lifts. If using with no lift, check clearances before installing. Not tested on non-US JKs with diesel engines or right hand drive axles. | | |
**** PRICE: 143.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4401
isbn: JK4401
upc: 816791021694

Start of page
Artec Front Lower Control Arm Skids (Bare Steel) - JK4404

Artec Front Lower Control Arm Skids (Bare Steel) - JK4404
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 07-Current Wrangler JK, 2 & 4 Door;Works on Dana 30 or Dana 44 axle;Made from 1/4 mild steel;Precision fit around axle inner C;Provides valuable reinforcement to a notoriously week area;Wrap around design provides protection for control arm joints;Sold as a pair;California Residents: WARNING These heavy duty skids are designed to take serious abuse and reinforce your front Dana 30 or Dana 44 JK axle lower control arm brackets. The 1/4 thick precision cut and formed components of this setup outperform the competition. Please note this requires welding and general fabrication and its recommended to remove the upper ball joint prior to welding. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. | Bare Steel | |
**** PRICE: 47.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4404
isbn: JK4404
upc: 816791021717

Start of page
Artec Industries Inner C Gussets - JK4405

Artec Industries Inner C Gussets - JK4405
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 07-Current Wrangler JK, 2 & 4 Door;Works on Dana 30 or Dana 44 axle;Made from 1/4 mild steel;Precision fit around axle inner C;Provides valuable reinforcement to a notoriously weak area;Sold as a pair;California Residents: WARNING These heavy duty skids are designed to take serious abuse and reinforce your front Dana 30 or Dana 44 JK Inner Cs. The 1/4 thick precision cut and formed components of this setup outperform the competition. Please note this requires welding and general fabrication. | | |
**** PRICE: 83.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4405
isbn: JK4405
upc: 816791021724

Start of page
Artec Heavy Duty Raised Tracbar Bracket - JK4406

Artec Heavy Duty Raised Tracbar Bracket - JK4406
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 2 and 4-door models;For use with drag link flip kit and a minimum of 4 inch lift;Made from 1/4 inch mild steel;Lifts factory sway bar mount 1.75 inch;Adjusts roll center 3 inch higher for stability;Bare steel;California Residents: WARNING This heavy bracket is designed to take serious abuse and replace your front Dana 30 or Dana 44 JK factory tracbar bracket. The 1/4 thick precision cut and formed components of this setup outperform the competition. NOTE: This bracket offers raised tracbar holes at 1.75 and 3.0. This bracket is for use with a drag link flip (which requires a minimum 3 inch lift and bumpstop extensions.) This bracket has nothing to do with your lift amount. If your lift replaces your tracbar and mounts to the factory axle bracket (typical with a lift that includes an adjustable tracbar), choose the factory height bracket #A/IJK4407. Please note this requires welding and general fabrication. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. | | |
**** PRICE: 55.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4406
isbn: JK4406
upc: 816791021731

Start of page
Artec Heavy Duty Stock Tracbar Bracket - JK4407

Artec Heavy Duty Stock Tracbar Bracket - JK4407
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 2 and 4-door models;Maintains factory sway bar mount location;Made from 1/4 inch mild steel;Stock tracbar upgrade;Bare steel;California Residents: WARNING This heavy bracket is designed to take serious abuse and replace your front Dana 30 or Dana 44 JK factory tracbar bracket. The 1/4 thick precision cut and formed components of this setup outperform the competition. NOTE: If your lift replaces your tracbar and mounts to the factory axle bracket (typical with an lift that includes an adjustable tracbar), choose this bracket. If you are doing a drag link flip (minimum 3.0 lift needed for flip), choose #A/IJK4406. Please note this requires welding and general fabrication. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. | | |
**** PRICE: 46.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4407
isbn: JK4407
upc: 816791021748

Start of page
Artec Industries JK Front Axle Armor Kit - JK4410

Artec Industries JK Front Axle Armor Kit - JK4410
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 2 and 4-door models;With Dana 44 front axle;Includes raised tracbar bracket height;For use with drag link flip kit and a minimum of 3 inch lift;Made from 1/4 inch mild steel;Bare steel;California Residents: WARNING This heavy duty and light weight truss system and armor is designed to take serious abuse and reinforce your front Dana 44 JK axle. The 1/4 thick truss top and 10Ga. gusseting incorporates a unique design to strengthen both axle tubes, not just the long tube. The precision cut and formed components of this setup ensure a hassle-free installation. Kit includes: front axle truss, front lower control arm skids, inner c gussets and heavy duty raised tracbar bracket. Please note: If your lift replaces your tracbar and mounts to the factory axle bracket (typical with a lift that includes an adjustable tracbar), choose the factory height bracket #A/IJK4411. If you are doing a Drag link flip (which requires a minimum 3 lift and bumpstop extensions), choose the raised height bracket kit. This kit requires welding and general fabrication. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. | | |
**** PRICE: 328.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4410
isbn: JK4410
upc: 816791021755

Start of page
Artec Industries JK Front Axle Armor Kit - JK4411

Artec Industries JK Front Axle Armor Kit - JK4411
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 2 and 4-door models;With Dana 44 front axle;Includes factory height tracbar bracket;Made from 1/4 inch mild steel;Bare steel;California Residents: WARNING This heavy duty and light weight truss system and armor is designed to take serious abuse and reinforce your front Dana 44 JK axle. The 1/4 thick truss top and 10Ga. gusseting incorporates a unique design to strengthen both axle tubes, not just the long tube. The precision cut and formed components of this setup ensure a hassle-free installation. Kit includes: front axle truss, front lower control arm skids, inner c gussets and heavy duty stock height tracbar bracket. Please note: If your lift replaces your tracbar and mounts to the factory axle bracket (typical with a lift that includes an adjustable tracbar), choose the factory height bracket. If you are doing a Drag link flip (which requires a minimum 3 lift and bumpstop extensions), choose the raised height bracket kit #A/IJK4410. This kit requires welding and general fabrication. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. | | |
**** PRICE: 317.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4411
isbn: JK4411
upc: 816791021762

Start of page
Artec Industries Lower Control Arm Brackets - JK4412

Artec Industries Lower Control Arm Brackets - JK4412
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 2 and 4-door models;1/4 inch thick boxed steel plate;2.625 inch mounting width Grease Sold as a pair;California Residents: WARNING Do you have bent and mangled factory lower control arm brackets? Its no surprise since they are practically made of sheet-metal. These HEAVY DUTY brackets replace the factory brackets so you'll never have to worry about ripping off a bracket again. Bracket wraps around axle tube more than factory for additional weld surface area, which significantly reduces the chance the bracket can rip off. | | |
**** PRICE: 60.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4412
isbn: JK4412
upc: 816791021779

Start of page
Artec Dana 44 Rear Axle Truss - JK4420

Artec Dana 44 Rear Axle Truss - JK4420
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 07-Current Wrangler JK, 2 & 4 Door;Works on Dana 44 rear axle;Made from 1/4 and .10Ga thick mild steel;Ideal for mounting 3 link suspension;Spans length between spring buckets 26.5;This is the truss only;California Residents: WARNING This heavy duty and light weight truss system and armor is designed to take serious abuse and reinforce your front Dana 44 JK axle. The 1/4 thick truss top incorporates a unique design to strengthen both the axle and provide a low profile link mounting surface. The base truss itself spans about 26.5 inches across the center of your axle. Specifically designed for the JK 44 axle. Trimming required for fitment on other centered rear Dana 44 axles. The Jeep JK Rear Dana 44 has a centered differential housing that measures approx. 16. 375 and the axle tube diameter is 3.25 inches. Other Dana 44s will measure differently and have differing axle tube diameters. Please ensure your axle meets these dimensions prior to ordering. This kit requires general welding and fabrication skills. | | |
**** PRICE: 163.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4420
isbn: JK4420
upc: 816791021786

Start of page
Artec Dana 44 Rear Axle Truss - JK4421

Artec Dana 44 Rear Axle Truss - JK4421
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 07-Current Wrangler JK, 2 & 4 Door;Works on Dana 44 rear axle;Made from 1/4 and .10Ga thick mild steel;Ideal for mounting 3 link suspension;Spans length between spring buckets 26.5;Includes spring perches;California Residents: WARNING This heavy duty and light weight truss system and armor is designed to take serious abuse and reinforce your front Dana 44 JK axle. The 1/4 thick truss top incorporates a unique design to strengthen both the axle and provide a low profile link mounting surface. The base truss itself spans about 26.5 inches across the center of your axle. Specifically designed for the JK 44 axle. Trimming required for fitment on other centered rear Dana 44 axles. The Jeep JK Rear Dana 44 has a centered differential housing that measures approx. 16. 375 and the axle tube diameter is 3.25 inches. Other Dana 44s will measure differently and have differing axle tube diameters. Please ensure your axle meets these dimensions prior to ordering. This kit requires general welding and fabrication skills. | | |
**** PRICE: 245.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4421
isbn: JK4421
upc:

Start of page
Artec Industries Rear Upper Control Arm Brackets - JK4424

Artec Industries Rear Upper Control Arm Brackets - JK4424
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 2 and 4-door models;Factory 2.4 inch mounting width;Wraps around axle tube more than stock;1/4 inch steel boxed plate;Grease Sold as a pair;Welding required;California Residents: WARNING Do you have bent and mangled factory upper control arm brackets? Its no surprise since they are practically made of sheet-metal. These HEAVY DUTY brackets replace the factory brackets so you'll never have to worry about ripping off a bracket again. | | |
**** PRICE: 60.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4424
isbn: JK4424
upc: 816791021809

Start of page
Artec Industries Rear Coil Perches and Retainers - JK4425

Artec Industries Rear Coil Perches and Retainers - JK4425
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 2 and 4-door models;1/4 inch CNC laser cut steel;Clockable to any angle for larger lifts;Includes bottom perches, tubing spacers, flat tube caps, spring retainers and 1/2 inch retainer hardware for both sides of the axle;Sold As A Pair;California Residents: WARNING The perfect compliment to your Artec JK Rear Axle Truss. Precisely locates rear coil springs in factory location for an easy, measure-free swap when used with Artec JK Rear Axle Truss. Larger front side and laser etch guide for locating spring 1 inch forward for wheelbase stretch. | | |
**** PRICE: 89.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4425
isbn: JK4425
upc: 816797087816

Start of page
Artec Industries JK Rear Trackbar Bracket - JK4426

Artec Industries JK Rear Trackbar Bracket - JK4426
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 1/4 mild steel;Bare steel;Precision CNC cut and bent for great fitment;Replaces factory bracket for those with 2.0 lift or higher;Adjusts roll center higher for greater stability;Improves ground clearance over factory brackets;California Residents: WARNING This heavy bracket is designed to take serious abuse and replace your worn JK factory rear trackbar bracket. The 1/4 thick precision cut and formed components of this setup out perform the competition.

NOTE: This bracket offers several raised trackbar holes. Every lift is different and some trial and error may be necessary to find the ideal ride. This bracket is NOT bolt on and requires welding.

NOTE: This kit requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation.

*Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. | | |
**** PRICE: 63.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4426
isbn: JK4426
upc: 816791021823

Start of page
Artec Industries Rear Lower Control Arm Brackets with Skids - JK4427

Artec Industries Rear Lower Control Arm Brackets with Skids - JK4427
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 2 and 4-door models;1/4 inch thick boxed steel plate;2.625 inch mounting width Provides mounting locations for your lower control arms, shocks and sway bar;Grease Sold as a pair;California Residents: WARNING Do you have bent and mangled factory lower control arm brackets? Its no surprise since they are practically made of sheet-metal. These heavy-duty brackets replace the factory brackets so you'll never have to worry about ripping off a bracket again. Bracket wraps around axle tube more than factory for additional weld surface area, which significantly reduces the chance the bracket can rip off. | | |
**** PRICE: 126.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4427
isbn: JK4427
upc: 816791021830

Start of page
Artec Industries Rear 3-Link Bracket for Rock Krawler Long Arm - JK4430

Artec Industries Rear 3-Link Bracket for Rock Krawler Long Arm - JK4430
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 2 and 4-door models;1/4 inch mild steel;CNC cut and bent for great Works with Rock Krawler X-Factor Long Arm;Will only work with ARTEC JK Truss;California Residents: WARNING When used with our JK Rear Truss, this heavy duty bracket is made to work in conjunction with the Rock Krawler X-Factor Long Arm System. It provides you with a low profile, high-clearance alternative not currently obtainable with Rock Krawlers truss. | | |
**** PRICE: 54.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK4430
isbn: JK4430
upc: 816791021847

Start of page
Artec Industries JK 1 Ton - Front Dana 60 Swap Kit with Daystar Bushings - JK6011

Artec Industries JK 1 Ton - Front Dana 60 Swap Kit with Daystar Bushings - JK6011
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 07-Current Wrangler JK, 2 & 4 Door;All the brackets necessary to swap front Dana 60 axle into JK;1/4 thick mild steel truss and brackets for much higher strength than the factory bracket and other aftermarket brackets;Precision CNC cut and bent for great fitment;Includes all the brackets necessary for a complete axle swap including upper and lower control arm mounts, shock mounts, anti-sway bar mounts, tracbar mount, and coil spring mounts;Save hours of installation time. Brackets are jigged into truss and set exact position automatically;Tracbar mount includes 4 locations for those who have aftermarket lifts;Easily upgradeable for future link geometry changes;Truss is reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly;California Residents: WARNING Artec Industries is excited to announce the JK ONE TON Axle Swap Kit for front Dana 60 axles. This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing the factory link, spring, anti-sway bar, and shock locations. The 1/4 thick truss incorporates a unique design to strengthen both the axle and incorporate the link brackets for ease of installation and added strength. By incorporating the link mounts into the truss, hours of work and trial and error can be avoided when compared to other bracket systems. Simply tack weld the truss together, place it on the axle and all the other brackets fit into place exactly where they need to be. The Front Dana 60 that works with this kit is from Ford 3/4 and 1 ton trucks from model years 85-91.5 (Kingpin) and 92-97 (Ball joint). This truss is not intended for older axles due to different differential offsets or newer Superduty axles (kit currently in R&D). The easiest way to identify if the axle will work with this kit is if the axle has 3.0 of driver side axle tube and 24.5 of passenger side axle tube. Please ensure it is a Dana 60 because these model years also had Dana 44 available. Due to the larger casting on the Dana 60 differential, the Lower Control Arm (LCA) brackets are wider than factory location. Modifications to your Lower Control Arms will likely be necessary. If you have adjustable arms with flexible style joints (heims, Johnny Joints, etc.), modifications may not be necessary. Upper Control Arm (UCA) brackets are also slightly higher than factory so adjustable arms may be necessary. Dana 60 axles DO NOT MATCH the factory JK 5 lug wheel bolt pattern. New wheels will need to be purchased to do this swap. Brake and Steering components NOT INCLUDED in this product, but will be available soon. This will likely require bumpstop extensions and a new tracbar since the steering is different on this axle from factory axle. The tracbar bracket is higher t | | |
**** PRICE: 588.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK6011
isbn: JK6011
upc: 816791021854

Start of page
Artec Industries JK 1 Ton - Front Dana 60 Swap Kit with Currie Johnny Joints - JK6012

Artec Industries JK 1 Ton - Front Dana 60 Swap Kit with Currie Johnny Joints - JK6012
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 07-Current Wrangler JK, 2 & 4 Door;All the brackets necessary to swap front Dana 60 axle into JK;1/4 thick mild steel truss and brackets for much higher strength than the factory bracket and other aftermarket brackets;Precision CNC cut and bent for great fitment;Includes all the brackets necessary for a complete axle swap including upper and lower control arm mounts, shock mounts, anti-sway bar mounts, tracbar mount, and coil spring mounts;Save hours of installation time. Brackets are jigged into truss and set exact position automatically;Tracbar mount includes 4 locations for those who have aftermarket lifts;Easily upgradeable for future link geometry changes;Truss is reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly;California Residents: WARNING Artec Industries is excited to announce the JK ONE TON Axle Swap Kit for front Dana 60 axles. This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing the factory link, spring, anti-sway bar, and shock locations. The 1/4 thick truss incorporates a unique design to strengthen both the axle and incorporate the link brackets for ease of installation and added strength. By incorporating the link mounts into the truss, hours of work and trial and error can be avoided when compared to other bracket systems. Simply tack weld the truss together, place it on the axle and all the other brackets fit into place exactly where they need to be. The Front Dana 60 that works with this kit is from Ford 3/4 and 1 ton trucks from model years 85-91.5 (Kingpin) and 92-97 (Ball joint). This truss is not intended for older axles due to different differential offsets or newer Superduty axles (kit currently in R&D). The easiest way to identify if the axle will work with this kit is if the axle has 3.0 of driver side axle tube and 24.5 of passenger side axle tube. Please ensure it is a Dana 60 because these model years also had Dana 44 available. Due to the larger casting on the Dana 60 differential, the Lower Control Arm (LCA) brackets are wider than factory location. Modifications to your Lower Control Arms will likely be necessary. If you have adjustable arms with flexible style joints (heims, Johnny Joints, etc.), modifications may not be necessary. Upper Control Arm (UCA) brackets are also slightly higher than factory so adjustable arms may be necessary. Dana 60 axles DO NOT MATCH the factory JK 5 lug wheel bolt pattern. New wheels will need to be purchased to do this swap. Brake and Steering components NOT INCLUDED in this product, but will be available soon. This will likely require bumpstop extensions and a new tracbar since the steering is different on this axle from factory axle. The tracbar bracket is higher t | | |
**** PRICE: 665.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IJK6012
isbn: JK6012
upc:

Start of page
Artec Industries 3/4 Inch Rod End Kit - RE1203L

Artec Industries 3/4 Inch Rod End Kit - RE1203L
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : Left hand/reverse thread direction;9/16 inch through-hole size;3/4 inch -16tpi Chromoly rod end with 3/4 inch bore;The mounting width with the spacer is 1.75 inch with a 9/16 inch hole;California Residents: WARNING Great for the builder on a budget. These rod ends from Midwest Control Products Corp are a great way to add strength, reliability, and flexibility to any situation that requires use of a rod end such as in suspension or steering applications. The -12 series utilizes a high strength Chromoly body with a polished chrome finish sure to impress. The ball is made from heat treated bearing steel for strength and hard chrome polished for a smooth surface. The race is injection molded nylon which keeps the joint quiet and tight for years and years of usability. | | |
**** PRICE: 47.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IRE1203L
isbn: RE1203L
upc:

Start of page
Artec 7/8 Inch Wide Rod End Kit - RE1401L

Artec 7/8 Inch Wide Rod End Kit - RE1401L
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 7/8 inch - 14tpi;Left hand thread;Mounting width of 1.75 inch;5/8 inch hole;Includes 1 rod end, 1 jam nut, 1 tube adapter, 2 spacers;Static load rating of 34,060 lbs.;Sold individually;California Residents: WARNING This kit includes one 7/8 -14tpi Chromoly rod end with 3/4 bore, one jam nut, one wrench flat tube adapter for 1.0 ID -1.5 OD tubing, and two stainless steel 5/8-3/4 high misalignment spacers. The mounting width with the spacer is 1.75 with a 5/8 hole. This is great for builder on a budget. These rod ends from Midwest Control Products Corp are a great way to add strength, reliability, and flexibility to any situation that requires use of a rod end such as in suspension or steering applications. The MXM series utilizes a high strength Chromoly body with a polished chrome finish sure to impress. The ball is made from heat treated bearing steel for strength and hard chrome polished for a smooth surface. The race is injection molded nylon which keeps the joint quiet and tight for years and years of usability. | | |
**** PRICE: 54.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IRE1401L
isbn: RE1401L
upc: 816791022882

Start of page
Artec Industries 3/4 Inch Rod End Kit - RE1203R

Artec Industries 3/4 Inch Rod End Kit - RE1203R
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : Right hand/standard thread direction;9/16 inch through-hole size;3/4 inch -16tpi Chromoly rod end with 3/4 inch bore;The mounting width with the spacer is 1.75 inch with a choice of 9/16 inch or 5/8 inch hole;California Residents: WARNING Great for the builder on a budget. These rod ends from Midwest Control Products Corp are a great way to add strength, reliability, and flexibility to any situation that requires use of a rod end such as in suspension or steering applications. The -12 series utilizes a high strength Chromoly body with a polished chrome finish sure to impress. The ball is made from heat treated bearing steel for strength and hard chrome polished for a smooth surface. The race is injection molded nylon which keeps the joint quiet and tight for years and years of usability. | | |
**** PRICE: 47.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IRE1203R
isbn: RE1203R
upc:

Start of page
Artec Industries Rod End Kit - RE1402L

Artec Industries Rod End Kit - RE1402L
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 7/8 inch Chromoly rod end;Wide;Thread direction: Left hand (reverse);Kit includes: rod end, 3/4 inch bore, jam nut, tube adapter and two misalignment spacers;Wrench flat tube adapter for 1.0 ID -1.5 OD tubing;Stainless steel 9/16-3/4 wide high misalignment spacers;Mounting width with the spacer is 2.63 with a 9/16 hole;California Residents: WARNING Great for the builder on a budget. These rod ends are a great way to add strength, reliability, and flexibility to any situation that requires use of a rod end such as in suspension or steering applications. The MXM series utilizes a high strength Chromoly body with a polished chrome finish sure to impress. The ball is made from heat treated bearing steel for strength and hard chrome polished for a smooth surface. The race is injection molded nylon which keeps the joint quiet and tight for years and years of usability. | | |
**** PRICE: 55.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IRE1402L
isbn: RE1402L
upc: 816791022905

Start of page
Artec 7/8 Inch Wide Rod End Kit - RE1402R

Artec 7/8 Inch Wide Rod End Kit - RE1402R
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 7/8 inch - 14tpi;Right hand thread;Mounting width of 2.63 inch;9/16 inch hole;Includes 1 rod end, 1 jam nut, 1 tube adapter, 2 spacers;Static load rating of 34,060 lbs.;Sold individually;California Residents: WARNING This kit includes one 7/8 -14tpi Chromoly rod end with 3/4 bore, one jam nut, one wrench flat tube adapter for 1.0 ID -1.5 OD tubing, and two stainless steel 9/16-3/4 WIDE high misalignment spacers. The mounting width with the spacer is 2.63 with a 9/16 hole. This is great for builder on a budget. These rod ends from Midwest Control Products Corp are a great way to add strength, reliability, and flexibility to any situation that requires use of a rod end such as in suspension or steering applications. The MXM series utilizes a high strength Chromoly body with a polished chrome finish sure to impress. The ball is made from heat treated bearing steel for strength and hard chrome polished for a smooth surface. The race is injection molded nylon which keeps the joint quiet and tight for years and years of usability. | | |
**** PRICE: 55.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IRE1402R
isbn: RE1402R
upc: 816791022912

Start of page
Artec Dana 60 Full Hydro Ram Mount - RM6001

Artec Dana 60 Full Hydro Ram Mount - RM6001
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Ram mount only;Made from 1/4 inch mild steel;Clearance to use rotated knuckles and pinions;California Residents: WARNING This heavy duty ram mount is designed to take serious abuse and protect some of the most vital and expensive components of your vehicle - your steering. The unique design places your ram in its most affective and strongest location - close to the axle centerline not high above it, and yet protects it from the rocks with the integrated 1/4 thick skid plate. Fits both PSC motorsports and Howe Performance double-ended hydraulic rams. Works perfectly with Artec Ultimate Dana 60 High Steer Arms giving you the strongest hydraulic steering solution on the market. The ram mount also extends end-to-end of the axle tube reinforcing the axle itself against bending and shearing. The gusseting design reinforces the ram mount to protect against damage from impact. | | |
**** PRICE: 284.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IRM6001
isbn: RM6001
upc: 816791023001

Start of page
Artec Dana 60 Full Hydro Ram Mount - RM6002

Artec Dana 60 Full Hydro Ram Mount - RM6002
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Ram mount only;Made from 1/4 inch mild steel;Clearance to use rotated knuckles and pinions;California Residents: WARNING This heavy duty ram mount is designed to take serious abuse and protect some of the most vital and expensive components of your vehicle - your steering. The unique design places your ram in its most affective and strongest location - close to the axle centerline not high above it, and yet protects it from the rocks with the integrated 1/4 thick skid plate. Fits both PSC motorsports and Howe Performance double-ended hydraulic rams. Works perfectly with Artec Ultimate Dana 60 High Steer Arms giving you the strongest hydraulic steering solution on the market. The ram mount also extends end-to-end of the axle tube reinforcing the axle itself against bending and shearing. The gusseting design reinforces the ram mount to protect against damage from impact. | | |
**** PRICE: 284.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IRM6002
isbn: RM6002
upc: 816791023018

Start of page
Artec Dana 60 Full Hydro Ram Mount - RM6003

Artec Dana 60 Full Hydro Ram Mount - RM6003
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Ram mount only;Made from 1/4 inch mild steel;Clearance to use rotated knuckles and pinions;California Residents: WARNING This heavy duty ram mount is designed to take serious abuse and protect some of the most vital and expensive components of your vehicle - your steering. The unique design places your ram in its most affective and strongest location - close to the axle centerline not high above it, and yet protects it from the rocks with the integrated 1/4 thick skid plate. Fits both PSC motorsports and Howe Performance double-ended hydraulic rams. Works perfectly with Artec Ultimate Dana 60 High Steer Arms giving you the strongest hydraulic steering solution on the market. The ram mount also extends end-to-end of the axle tube reinforcing the axle itself against bending and shearing. The gusseting design reinforces the ram mount to protect against damage from impact. | | |
**** PRICE: 284.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IRM6003
isbn: RM6003
upc: 816791023025

Start of page
Artec Dana 60 Full Hydro Ram Mount - RM6005

Artec Dana 60 Full Hydro Ram Mount - RM6005
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Ram mount only;Made from 1/4 inch mild steel;Clearance to use rotated knuckles and pinions;California Residents: WARNING This heavy duty ram mount is designed to take serious abuse and protect some of the most vital and expensive components of your vehicle - your steering. The unique design places your ram in its most affective and strongest location - close to the axle centerline not high above it, and yet protects it from the rocks with the integrated 1/4 thick skid plate. Fits both PSC motorsports and Howe Performance double-ended hydraulic rams. Works perfectly with Artec Ultimate Dana 60 High Steer Arms giving you the strongest hydraulic steering solution on the market. The ram mount also extends end-to-end of the axle tube reinforcing the axle itself against bending and shearing. The gusseting design reinforces the ram mount to protect against damage from impact. | | |
**** PRICE: 274.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IRM6005
isbn: RM6005
upc: 816791023032

Start of page
Artec DIY Ram Mount - RM6007

Artec DIY Ram Mount - RM6007
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Designed for 3.125 inch axle tube diameters;Ram mount only;Fits PSC and Howe Performance double ended rams;Made from 1/4 inch mild steel;Clearance to use rotated knuckles and pinions;Requires fabrication and modification;California Residents: WARNING This heavy duty ram mount is designed to take serious abuse and protect some of the most vital and expensive components of your vehicle - your steering. The unique design places your ram in its most affective and strongest location - close to the axle centerline not high above it, and yet protects it from the rocks with the integrated 1/4 thick skidplate. Fits both PSC motorsports and Howe Performance double-ended hydraulic rams. Works perfectly with our Ultimate Dana 60 High Steer Arms giving you the strongest hydraulic steering solution on the market. The ram mount also extends end-to-end of the axle tube reinforcing the axle itself against bending and shearing. The gusseting design reinforces the ram mount to protect against damage from impact. Since this kit is DIY, you cut out the section to clearance the third member. Works great for shortened Dana 60 axles and 9 inch housings. Please consult the dimensions of the mount to ensure it will work for your axle. Artec is not responsible if it doesn't fit your application after you have modified it. Please reinforce the area around the cutout if it is close or overlapping the speed holes. Axle tube diameter is 3.125 but can easily be modified to work for any size. Includes main ram mount, 3 large gussets, 2 small side gussets, bolt on diff skid and hardware for diff skid. | | |
**** PRICE: 284.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IRM6007
isbn: RM6007
upc: 816791023049

Start of page
Artec Bridge Upgrade Kit for Dana 60 - RM6030

Artec Bridge Upgrade Kit for Dana 60 - RM6030
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Made of 1/4 inch steel;Bare steel;California Residents: WARNING Did you install an Artec Truss only to later decide you also want a Hydraulic Ram Mount? Here is the kit you need to make that upgrade complete. This Bridge Upgrade Kit is designed to tie an Artec Truss and an Artec Ram Mount when purchased as separate items. Includes the standard Bridge used in the Ram Mount/Truss combos and also includes a weld-on Truss Flange and 7 grade 8 bolts and nuts. All pieces are 1/4 steel, CNC cut and bent. Works with all Artec Dana 60 Front Trusses and Ram Mounts. | | |
**** PRICE: 72.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IRM6030
isbn: RM6030
upc: 816791023056

Start of page
Artec High Steer ARP Studs and Nuts Kit - RR-D60116K-2

Artec High Steer ARP Studs and Nuts Kit - RR-D60116K-2
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Fit 1 - 1.5 thick arms;60 Kingpin Axle;220,000 psi tensile strength;Fine thread on both ends;Tapered nuts;Sold as a set of 4;California Residents: WARNING Artec Industries' mission is to provide world class aftermarket automotive parts to off-road enthusiasts. To break the mold on what has been done in our industry, redefine what performance is and add a level of design never before seen. They tirelessly exceed our customers' expectations through every process, and win their trust though exceptional service. Artec is devoted to pushing the boundaries of what has already been done and developing new products that not only function well, but look great as well. | | |
**** PRICE: 46.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IRR-D60116K-2
isbn: RR-D60116K-2
upc: 816791023131

Start of page
Artec Full Hydro Tie Rod Kit - SK1001

Artec Full Hydro Tie Rod Kit - SK1001
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : Includes 7/8 inch rod ends;Includes all necessary hardware;California Residents: WARNING Made specifically for Chevy front Dana 60s, this kit is the perfect complement to our Ultimate High Steer Arms and a PSC DE Hydraulic Ram. Kit includes: Four- 7/8 14tpi threaded x 3/4 bore Chromoly Heims (rod ends) - 2 RH, 2 LH, FOUR- 7/8 14tpi jam nuts - 2 RH, 2 LH, FOUR - 7/8 14 tpi tube adapters - 2 RH, 2 LH and TWO- 1.5 OD .250 wall DOM links. (10 inches long) | | |
**** PRICE: 163.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ISK1001
isbn: SK1001
upc:

Start of page
Artec Industries Wide 3/4 Inch High Misalignment Spacers - SP1203

Artec Industries Wide 3/4 Inch High Misalignment Spacers - SP1203
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : Made of 303 stainless steel;Mounting width of 2.625 inch;Sold as a pair - 2 misalignment spacers;California Residents: WARNING These spacers are great for using any heim that has a 3/4 bore and installing in a location that has a bracket width of 2.625 that is commonly found in many stock parts. Using this spacer also enables you to keep your 2.625 brackets if you decide to upgrade to a larger joint in the future, rather than cutting off the brackets and welding on new ones. A much better option than using two sets of spacers which allows for multiple shear points. Made from 303 stainless steel and offered in pairs. | | |
**** PRICE: 16.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ISP1203
isbn: SP1203
upc: 816791023285

Start of page
Artec 3/4 Inch High Misalignment Spacers - SP1202

Artec 3/4 Inch High Misalignment Spacers - SP1202
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : Made of 303 stainless steel;Sold as a pair - 2 misalignment spacers;California Residents: WARNING Includes 2 misalignment spacers for one rod end. | | |
**** PRICE: 14.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ISP1202
isbn: SP1202
upc: 816791023278

Start of page
Artec 1.0 Inch High Misalignment Spacers - SP1603

Artec 1.0 Inch High Misalignment Spacers - SP1603
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : Made of 303 stainless steel;Sold as a pair - 2 misalignment spacers;California Residents: WARNING Includes 2 misalignment spacers for one rod end. | | |
**** PRICE: 19.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ISP1603
isbn: SP1603
upc: 816791023384

Start of page
Artec 3/4 Inch High Misalignment Spacers - SP1201

Artec 3/4 Inch High Misalignment Spacers - SP1201
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : Made of 303 stainless steel;Sold as a pair - 2 misalignment spacers;California Residents: WARNING Includes 2 misalignment spacers for one rod end. | | |
**** PRICE: 14.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ISP1201
isbn: SP1201
upc:

Start of page
Artec 1.0 Inch High Misalignment Spacers - SP1601

Artec 1.0 Inch High Misalignment Spacers - SP1601
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : Made of 303 stainless steel;Sold as a pair - 2 misalignment spacers;California Residents: WARNING Includes 2 misalignment spacers for one rod end. | | |
**** PRICE: 19.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ISP1601
isbn: SP1601
upc:

Start of page
Artec Crossover Steering Kit - SK1401

Artec Crossover Steering Kit - SK1401
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Includes 7/8 inch rod ends;Requires customer to build and cut as needed;Includes all necessary hardware;California Residents: WARNING This kit will provide a drag link up to 54 inches long, and a tie rod up to 59 inches long. The Artec steering kit includes: 1 RH and 1 LH - 7/8 x 3/4 bore rod end for tie rod, 1 RH and 1 LH - 7/8 x 7/8 bore rod end for drag link, 2 RH and 2 LH - 7/8 x 14 tpi wrench flat tube adapters for 1.5 OD .250 wall tubing, 2 RH and 2 LH - 7/8 x 14 tpi Jam Nuts, 4 - 7/8 x 3/4 bore high misalignment spacers for drag link, 1 - 1.5 OD x .250 wall 1026 DOM tubing 48 long for drag link, 1 - 1.5 OD x .250 wall 1026 DOM tubing 53 long for tie rod. | | |
**** PRICE: 307.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ISK1401
isbn: SK1401
upc: 816791023254

Start of page
Artec Industries Tube Adapter - TA1401L

Artec Industries Tube Adapter - TA1401L
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 7/8 inch-14 tpi tube adapter;1 inch ID;1.50 inch OD;Left hand thread;Made from 1020 CR steel;Sold individually;California Residents: WARNING Tube adapter to attach your links to the rod ends. | | |
**** PRICE: 16.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITA1401L
isbn: TA1401L
upc:

Start of page
Artec Industries Tube Adapter - TA1402L

Artec Industries Tube Adapter - TA1402L
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : 7/8 inch-14 tpi tube adapter;1 inch ID;1.25 inch OD;Left hand thread;Made from 1020 CR steel;Sold individually;California Residents: WARNING Tube adapter to attach your links to the rod ends. | | |
**** PRICE: 7.00 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITA1402L
isbn: TA1402L
upc:

Start of page
Artec 7/8 Inch High Misalignment Spacers - SP1402

Artec 7/8 Inch High Misalignment Spacers - SP1402
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : Made of 303 stainless steel;Sold as a pair - 2 misalignment spacers;California Residents: WARNING Includes 2 misalignment spacers for one rod end. | | |
**** PRICE: 16.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ISP1402
isbn: SP1402
upc: 816791023346

Start of page
Artec Dana 60 Front Truss and Ram Mount - TR6030

Artec Dana 60 Front Truss and Ram Mount - TR6030
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Made from 3/8 inch and 1/4 inch thick mild steel;Reinforced truss for maximum strength;Spans entire length of axle;Ram mount doubles as a skid plate;Bare steel;California Residents: WARNING This heavy duty truss system is designed to take serious abuse and protect some of the most vital and expensive components of your vehicle - your steering. The unique design places your ram in its most affective and strongest location - close to the axle centerline not high above it, and yet protects it from the rocks with the integrated 1/4 thick skidplate. Fits both PSC motorsports and Howe Performance double-ended hydraulic rams. Works perfectly with our Ultimate Dana 60 High Steer Arms giving you the strongest hydraulic steering solution on the market. The 3/8 thick truss extends end-to-end of the axle tube providing not only a location for mounting your 3 and 4 links, but also truly reinforcing the axle itself against bending and shearing. The unique gusseting design allows both the truss and ram mount to completely reinforce each other in every direction. | | |
**** PRICE: 524.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR6030
isbn: TR6030
upc: 816791024589

Start of page
Artec Dana 60 Front Truss - TR6031

Artec Dana 60 Front Truss - TR6031
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Made from 3/8 inch and 1/4 inch thick mild steel;Reinforced truss for maximum strength;Spans entire length of axle;Bare steel;California Residents: WARNING This heavy duty truss system is designed to take serious abuse and reinforce your entire axle while also providing a flat surface to mount your upper links. The 3/8 thick truss top and 1/4 thick gussets incorporates a unique design to strengthen both the axle and the link mounting surface. This kit requires general welding and fabrication skills. | | |
**** PRICE: 255.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR6031
isbn: TR6031
upc: 816791024596

Start of page
Artec Dana 60 Front Truss - TR6033

Artec Dana 60 Front Truss - TR6033
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Made from 3/8 inch and 1/4 inch thick mild steel;Reinforced truss for maximum strength;Spans entire length of axle;Bare steel;California Residents: WARNING This heavy duty truss system is designed to take serious abuse and reinforce your entire axle while also providing a flat surface to mount your upper links. The 3/8 thick truss top and 1/4 thick gussets incorporates a unique design to strengthen both the axle and the link mounting surface. This kit requires general welding and fabrication skills. | | |
**** PRICE: 279.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR6033
isbn: TR6033
upc: 816791024619

Start of page
Artec Dana 60 Front Truss and Ram Mount - TR6032

Artec Dana 60 Front Truss and Ram Mount - TR6032
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Made from 3/8 inch and 1/4 inch thick mild steel;Reinforced truss for maximum strength;Spans entire length of axle;Ram mount doubles as a skid plate;Bare steel;California Residents: WARNING This heavy duty truss system is designed to take serious abuse and protect some of the most vital and expensive components of your vehicle - your steering. The unique design places your ram in its most affective and strongest location - close to the axle centerline not high above it, and yet protects it from the rocks with the integrated 1/4 thick skidplate. Fits both PSC motorsports and Howe Performance double-ended hydraulic rams. Works perfectly with our Ultimate Dana 60 High Steer Arms giving you the strongest hydraulic steering solution on the market. The 3/8 thick truss extends end-to-end of the axle tube providing not only a location for mounting your 3 and 4 links, but also truly reinforcing the axle itself against bending and shearing. The unique gusseting design allows both the truss and ram mount to completely reinforce each other in every direction. | | |
**** PRICE: 558.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR6032
isbn: TR6032
upc: 816791024602

Start of page
Artec Industries Low Profile Axle Truss - TR6050

Artec Industries Low Profile Axle Truss - TR6050
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Fits 1999 and up Ford Super Duty front axles;3/8 thick mild steel truss top and 1/4 mild steel ram mount and gussets;Truss is super low profile allowing better clearance for oil pans and allowing more uptravel;Spans entire length of axle for complete reinforcement of the axle tubes;Reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly;Clearanced for differential breather tube;California Residents: WARNING The next generation of Artec trusses is here. This revolutionary new design takes the years of race and recreational abuse of our first generation of trusses and adds additional strength and functionality. The most noticeable is how the truss top now bends around the differential for a better fit and clearance. This is ideal for vehicles needing more uptravel or those building low center of gravity vehicles. | | |
**** PRICE: 289.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR6050
isbn: TR6050
upc:

Start of page
Artec Industries Low Profile Ford Kingpin/Balljoint Front Truss - TR6051

Artec Industries Low Profile Ford Kingpin/Balljoint Front Truss - TR6051
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 85-97 Ford Kingpin and Ball joint axles;3/8 thick mild steel truss top and 1/4 mild steel gussets;Precision CNC cut and bent for great fitment;Truss is super low profile allowing better clearance for oil pans and allowing more uptravel;Main interlocking gussets are wider than Gen1 trusses adding overall strength to truss;Internal gussets conform tightly to the contours of the differential allowing you to weld to it for additional strength and rigidity;Compatible with Artec RM6003 Ram Mount for 85-91.5 axle;California Residents: WARNING The next generation of Artec trusses is here. This revolutionary new design takes the years of race and recreational abuse of our first generation of trusses and adds additional strength and functionality. The most noticeable is how the truss top now bends around the differential for a better fit and clearance. This is ideal for vehicles needing more uptravel or those building low center of gravity vehicles. | | |
**** PRICE: 289.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR6051
isbn: TR6051
upc:

Start of page
Artec Industries Low Profile Front Truss For Ultimate Dana 60 - TR6056

Artec Industries Low Profile Front Truss For Ultimate Dana 60 - TR6056
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 3/8 inch thick mild steel truss top;1/4 inch mild steel ram mount and gussets;Precision CNC cut and bent for great fitment;Truss is reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly;California Residents: WARNING The next generation of Artec trusses is here. This revolutionary new design takes the years of race and recreational abuse of our first generation of trusses and adds additional strength and functionality. The most noticeable is how the truss top now bends around the differential for a better fit and clearance. This is ideal for vehicles needing more uptravel or those building low center of gravity vehicles. This truss is designed to work directly with the Ultimate Dana 60 Crate Axle but removes all the factory brackets for more custom, high-end suspensions such as coilovers and ORI struts but still provides the capability of using in a JK with its steering and ABS. | | |
**** PRICE: 299.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR6056
isbn: TR6056
upc:

Start of page
Artec Dana 60 Rear Truss - TR6060

Artec Dana 60 Rear Truss - TR6060
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Made from 3/8 inch and 1/4 inch thick mild steel;Reinforced truss for maximum strength;Great link mount location;Bare steel;California Residents: WARNING This heavy duty truss system is designed to take serious abuse and reinforce your entire axle while also providing a flat surface to mount your upper links. The 3/8 thick truss top and 1/4 thick gussets incorporates a unique design to strengthen both the axle and the link mounting surface. Also fits Dana 70U with minor trimming. This kit requires general welding and fabrication skills. | | |
**** PRICE: 255.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR6060
isbn: TR6060
upc: 816791024626

Start of page
Artec Dana 60 Modular Rear Truss - TR6061

Artec Dana 60 Modular Rear Truss - TR6061
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Made from 3/8 inch and 1/4 inch thick mild steel;Reinforced truss for maximum strength;Great link mount location;Bare steel;California Residents: WARNING Perfect for that one-ton swap in the back of your TJ or YJ, the Dana 60 Modular Rear Axle Truss is the most versatile truss available for the common Dana 60 axle. This heavy duty truss system is designed to take serious abuse and reinforce your axle while also providing a flat surface to mount your upper links. The 3/8 thick truss top and 1/4 thick gussets incorporates a unique design to strengthen both the axle and the link mounting surface. | | |
**** PRICE: 236.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR6061
isbn: TR6061
upc: 816791024633

Start of page
Artec Dana 80 Rear Truss - TR8001

Artec Dana 80 Rear Truss - TR8001
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Made from 3/8 inch and 1/4 inch thick steel;Allows for a selection of pinion angles from 7 to 20 degrees;Overall length is 53 inch;Bare steel;California Residents: WARNING Artec Industries is excite to announce the NEW Dana 80 Rear Axle Truss. This heavy duty truss system is designed to take serious abuse and reinforce your entire axle while also providing a flat surface to mount your upper links. The 3/8 thick truss top and 1/4 thick gussets incorporates a unique design to strengthen both the axle and the link mounting surface. This truss allows for a selection of pinion angles from 7 to 20 degrees. Any more or less and some trimming may be required. This truss fits Dana 80 axles with a centered differential. If your axle is not centered, contact us for custom fitment. Overall length on this truss is about 53 inches. NOTE: This truss is very form fitting to the contours of the casting. Due to variances in casting of this axle over the years, some trimming may be necessary on the truss and non-essential parts of the casting. | | |
**** PRICE: 358.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR8001
isbn: TR8001
upc: 816791024725

Start of page
Artec 8.8 Swap Kit with Truss - TR8801

Artec 8.8 Swap Kit with Truss - TR8801
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 97-06 Wrangler TJ/LJ;Made from 1/4 thick mild steel;Includes all brackets necessary for a complete axle swap;Includes upper and lower control arm mounts, shock mounts, sway bar mounts, track bar mount and coil spring mounts;Reinforced truss for maximum strength;California Residents: WARNING This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing the factory link, anti-sway bar, and shock locations. The 1/4 thick truss top incorporates a unique design to strengthen both the axle and incorporate the link brackets for ease of installation and added strength. By incorporating the link mounts into the truss, hours of work and trial and error can be avoided when compared to other bracket systems. Simply tack weld the truss together, place it on the axle and all the other brackets fit into place exactly where they need to be. The Ford Explorer 8.8 features: same lug nut bolt pattern as Dana 35, 3-1/4 diameter tubes as compared to 2.625 Dana 35, disc brakes (1995 & newer), 31 spline axle shafts, 8.8 diameter ring gear which 120% stronger than Dana 35, only 20 pounds more than Dana 35, and a trac-loc differential stock. When switching, the 3.73 gear ratio may need to be changed to match your Jeep gears and wheel spacers may be necessary to bring the width back to factory specs since the 8.8 is 1.25 narrower than the Dana 35. Please note this requires welding and general fabrication. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. Will require brake line relocation to fit. | | |
**** PRICE: 424.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR8801
isbn: TR8801
upc: 816791024749

Start of page
Artec 8.8 Swap Kit with Truss - TR8802

Artec 8.8 Swap Kit with Truss - TR8802
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 93-98 Grand Cherokee ZJ;Made from 1/4 thick mild steel;Includes all brackets necessary for a complete axle swap;Includes upper and lower control arm mounts, shock mounts, sway bar mounts, track bar mount and coil spring mounts;Reinforced truss for maximum strength;California Residents: WARNING This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing the factory link, anti-sway bar, and shock locations. The 1/4 thick truss top incorporates a unique design to strengthen both the axle and incorporate the link brackets for ease of installation and added strength. By incorporating the link mounts into the truss, hours of work and trial and error can be avoided when compared to other bracket systems. Simply tack weld the truss together, place it on the axle and all the other brackets fit into place exactly where they need to be. The Ford Explorer 8.8 features: same lug nut bolt pattern as Dana 35, 3-1/4 diameter tubes as compared to 2.625 Dana 35, disc brakes (1995 & newer), 31 spline axle shafts, 8.8 diameter ring gear which 120% stronger than Dana 35, only 20 pounds more than Dana 35, and a trac-loc differential stock. When switching, the 3.73 gear ratio may need to be changed to match your Jeep gears and wheel spacers may be necessary to bring the width back to factory specs since the 8.8 is 1.25 narrower than the Dana 35. Please note this requires welding and general fabrication. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. Will require brake line relocation to fit. | | |
**** PRICE: 495.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR8802
isbn: TR8802
upc: 816791024763

Start of page
Artec 8.8 Modular truss - TR8803

Artec 8.8 Modular truss - TR8803
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 87-06 Wrangler TJ/YJ;84-01 Cherokee XJ;Fits Ford 8.8 axles;Made of 1/4 mild steel;Can be used with coils or leaf springs;Bolts to the cast housing and welds to axle;Bare steel;California Residents: WARNING Perfect for that axle swap in the back of your TJ, XJ or YJ, the 8.8 Modular Axle Truss is the most versatile truss available for the popular Ford Explorer 8.8 axle. This heavy duty truss system is designed to take serious abuse and reinforce your axle while also providing a flat surface to mount your upper links. The 1/4 thick truss incorporates a unique design to strengthen both the axle and the link mounting surface. The truss includes a bridge that ties into a flange off the pinion of the axle. This bridge is intended to be trimmed to fit depending on what pinion you set for the top of the truss. By tying it into the pinion, it reinforces the strength of the whole truss. This kit requires general welding and fabrication skills. | | |
**** PRICE: 236.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR8803
isbn: TR8803
upc: 816791024770

Start of page
Artec 8.8 Truss Bridge - TR8804

Artec 8.8 Truss Bridge - TR8804
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Fits 8.8 axles with Artec truss;Bolts to the cast housing and welds to truss;Hardware not included;Bare steel;California Residents: WARNING Do you have the popular 8.8 truss from Artec? Want to add even more strength and help keep your tubes from spinning? Our 8.8 Truss Bridge has been used on our Modular 8.8 truss and is now available for sale individually. By connecting your truss to the 3rd member of your axle, you add increases resistance to spinning your axle tubes. This piece bolts to the casting and welds to the truss itself. May require trimming on the truss side depending on your pinion angle. Hardware not included. | | |
**** PRICE: 25.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-ITR8804
isbn: TR8804
upc: 816791024787

Start of page
Artec HP Dana 30 Front Axle Truss - XJ3001

Artec HP Dana 30 Front Axle Truss - XJ3001
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Truss only;Made of 1/4 inch mild steel;Spans length of long and short side;Bare steel;California Residents: WARNING This heavy duty and light weight truss system is designed to take serious abuse and reinforce your front high pinion Dana 30 XJ axle. The 1/4 thick truss top and 10Ga. gusseting incorporates a unique design to strengthen both axle tubes, not just the long tube. The precision cut and formed components of this setup ensure a hassle-free installation. Truss only- No bushings/joints/keyed tabs included. Key hole slots on top of truss where keyed tabs would go must be filled with weld. Use this only if you aren't connecting the passenger side UCA. This kit requires general welding and fabrication skills. Image is for illustrative purposes only. | | |
**** PRICE: 143.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IXJ3001
isbn: XJ3001
upc: 816791024886

Start of page
Artec HP Dana 30 Front Axle Truss - XJ3003

Artec HP Dana 30 Front Axle Truss - XJ3003
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : 84-01 Cherokee XJ;High Pinion axles;Currie johnny joints in upper control arm mount;Made of 1/4 mild steel;Spans length of long and short side;Bare steel;California Residents: WARNING This heavy duty and light weight truss system is designed to take serious abuse and reinforce your front high pinion Dana 30 XJ axle. The 1/4 thick truss top and 10Ga. gusseting incorporates a unique design to strengthen both axle tubes, not just the long tube. The precision cut and formed components of this setup ensure a hassle-free installation. Not only is this just a truss, but you also get a Currie Johnny Joints - Includes 2.0 Press-in machined Johnny Joint (CE-9112M), 2.0 weldable Johnny Joint (CE-9112), and two keyed tabs for Passenger side. Both joints include greaseable bolts. This kit requires general welding and fabrication skills. Image is for illustrative purposes only, the joints in the images are not Currie joints. | | |
**** PRICE: 297.99 USD
Manufacturer : Artec Industries
Tags: - .
SKU: A-IXJ3003
isbn: XJ3003
upc: 816791024909

Start of page
American Trail Products Rock Slider - 31070002

American Trail Products Rock Slider - 31070002
Vehicles & Parts > Vehicle Parts & Accessories > Vehicle Safety & Security > Off-Road & All-Terrain Vehicle Protective Gear
ATG_SKU_4WD_data_feed
Description : 07-Current Wrangler JK, 4-Door;Protect your rocker panels;3/16 steel construction with sturdy internal gussets;Stainless steel hardware;Boat-side style rocker armor;Proudly manufactured in the USA;Ships raw;California Residents: WARNING Are you looking to protect your rocker panels without sacrificing ground clearance? American Trail Products Rock Sliders is your answer, your search is over! Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16 extreme-duty steel plate. These will shield and protect the area of your Jeep Wrangler JK most vulnerable to damage from rocks, logs and other trail hazards. Our Rock Sliders follow your Jeeps body contour giving your JK a clean look but also attaching to the factory fame mounts for solid protection.

These Rock Sliders are two-piece design, boat-side style rocker armor. The upper piece fits the lower section of your Jeep's exterior sheet metal like a glove, conforming to the vehicles curvature and providing protection. The lower piece incorporates a rub rail/step that protrudes about 3.5 outboard of the Jeep's body tub. The top surface of the rub rail may also serve as an entry step. | | |
**** PRICE: 749.95 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T31070002
isbn: 31070002
upc:

Start of page
American Trail Products Carrier Bearing Skid Plate - 31150001

American Trail Products Carrier Bearing Skid Plate - 31150001
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : Manufactured and designed in the U.S.A;Fits all Jeep Renegade (15-17) models (including lifted renegades);3/16 Plate steel structure with welded seams;Easy installation (installs in minutes);Comes with mounting hardware; Replaces stock (TrailHawk) OEM thin skid plate;Tough texture black powder coat ;California Residents: WARNING The Renegade Carrier Bearing Skid Plate and all other ATP products are designed to meet the performance demands required by off-road enthusiasts in every situation. The ATP Renegade Carrier Bearing Skid Plates are manufactured in the USA with functionality in mind while adding some style and protection to the underside of your Jeep. This skid plate is manufactured from 3/16 plate steel, CNC laser cut, precision formed and then welded for the ultimate strength and protection. When designing this product we feel we thought of it all. We added a center rib inside the skid to add strength and durability, while also keeping the heat away from your carrier bearing. | | |
**** PRICE: 169.95 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T31150001
isbn: 31150001
upc:

Start of page
American Trail Products Front Grab Handles (Silver) - 36070013S

American Trail Products Front Grab Handles (Silver) - 36070013S
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Interior Fittings
ATG_SKU_4WD_data_feed
Description : Color: Silver;Manufactured and designed in the U.S.A.;Product is engineered to fit the Jeep JK and JKU 2007 - 2018;ATP Grab Handles are manufactured from 6061-T6 aluminum;Interior Grab Handles are anodized Class 2 Mil Spec coating;Stainless hardware included;Front Grab handles are sold as a pair;This is a bolt on product, no permanent vehicle modifications required;California Residents: WARNING The billet grab handles, and all other ATP products are designed to meet the performance demands required by off-road enthusiasts in every situation. The ATP Billet Grab Handles are manufactured in the USA with functionality in mind while adding some style to the interior of your Jeep.The front grab handles are manufactured completely from 6061-T6 Billet Aluminum, and are offered in a variety of anodized colors. The handles are sold in pairs, and can be purchase based on your door configuration.Installation of our handles can be achieved in minutes and only required removal of factory bolts, installing the handles, and securing with supplied stainless hardware. | Silver | |
**** PRICE: 129.99 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070013S
isbn: 36070013S
upc:

Start of page
American Trail Products Front Grab Handles (Gray) - 36070013Y

American Trail Products Front Grab Handles (Gray) - 36070013Y
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Interior Fittings
ATG_SKU_4WD_data_feed
Description : Color: Gray;Manufactured and designed in the U.S.A.;Product is engineered to fit the Jeep JK and JKU 2007 - 2018;ATP Grab Handles are manufactured from 6061-T6 aluminum;Interior Grab Handles are anodized Class 2 Mil Spec coating;Stainless hardware included;Front Grab handles are sold as a pair;This is a bolt on product, no permanent vehicle modifications required;California Residents: WARNING The billet grab handles, and all other ATP products are designed to meet the performance demands required by off-road enthusiasts in every situation. The ATP Billet Grab Handles are manufactured in the USA with functionality in mind while adding some style to the interior of your Jeep.The front grab handles are manufactured completely from 6061-T6 Billet Aluminum, and are offered in a variety of anodized colors. The handles are sold in pairs, and can be purchase based on your door configuration.Installation of our handles can be achieved in minutes and only required removal of factory bolts, installing the handles, and securing with supplied stainless hardware. | Gray | |
**** PRICE: 129.99 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070013Y
isbn: 36070013Y
upc:

Start of page
American Trail Products Rear Grab Handles (Green) - 36070015G

American Trail Products Rear Grab Handles (Green) - 36070015G
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Interior Fittings
ATG_SKU_4WD_data_feed
Description : Color: Green;Manufactured and designed in the U.S.A.;Product is engineered to fit the Jeep JK and JKU 2007 - 2018;ATP Grab Handles are manufactured from 6061-T6 aluminum;Interior Grab Handles are anodized Class 2 Mil Spec coating;Stainless hardware included;Rear Grab handles are sold as a pair;This is a bolt on product, no permanent vehicle modifications required;California Residents: WARNING The billet grab handles, and all other ATP products are designed to meet the performance demands required by off-road enthusiasts in every situation. The ATP Billet Grab Handles are manufactured in the USA with functionality in mind while adding some style to the interior of your Jeep.The rear grab handles are manufactured completely from 6061-T6 Billet Aluminum, and are offered in a variety of anodized colors. The handles are sold in pairs, and can be purchase based on your door configuration.Installation of our handles can be achieved in minutes and only required removal of factory bolts, installing the handles, and securing with supplied stainless hardware. | Green | |
**** PRICE: 129.99 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070015G
isbn: 36070015G
upc:

Start of page
American Trail Products Rear Grab Handles (Blue) - 36070015B

American Trail Products Rear Grab Handles (Blue) - 36070015B
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Interior Fittings
ATG_SKU_4WD_data_feed
Description : Color: Blue;Manufactured and designed in the U.S.A.;Product is engineered to fit the Jeep JK and JKU 2007 - 2018;ATP Grab Handles are manufactured from 6061-T6 aluminum;Interior Grab Handles are anodized Class 2 Mil Spec coating;Stainless hardware included;Rear Grab handles are sold as a pair;This is a bolt on product, no permanent vehicle modifications required;California Residents: WARNING The billet grab handles, and all other ATP products are designed to meet the performance demands required by off-road enthusiasts in every situation. The ATP Billet Grab Handles are manufactured in the USA with functionality in mind while adding some style to the interior of your Jeep.The rear grab handles are manufactured completely from 6061-T6 Billet Aluminum, and are offered in a variety of anodized colors. The handles are sold in pairs, and can be purchase based on your door configuration.Installation of our handles can be achieved in minutes and only required removal of factory bolts, installing the handles, and securing with supplied stainless hardware. | Blue | |
**** PRICE: 129.99 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070015B
isbn: 36070015B
upc:

Start of page
American Trail Products Rear Grab Handles (Black) - 36070015K

American Trail Products Rear Grab Handles (Black) - 36070015K
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Interior Fittings
ATG_SKU_4WD_data_feed
Description : Color: Black;Manufactured and designed in the U.S.A.;Product is engineered to fit the Jeep JK and JKU 2007 - 2018;ATP Grab Handles are manufactured from 6061-T6 aluminum;Interior Grab Handles are anodized Class 2 Mil Spec coating;Stainless hardware included;Rear Grab handles are sold as a pair;This is a bolt on product, no permanent vehicle modifications required;California Residents: WARNING The billet grab handles, and all other ATP products are designed to meet the performance demands required by off-road enthusiasts in every situation. The ATP Billet Grab Handles are manufactured in the USA with functionality in mind while adding some style to the interior of your Jeep.The rear grab handles are manufactured completely from 6061-T6 Billet Aluminum, and are offered in a variety of anodized colors. The handles are sold in pairs, and can be purchase based on your door configuration.Installation of our handles can be achieved in minutes and only required removal of factory bolts, installing the handles, and securing with supplied stainless hardware. | Black | |
**** PRICE: 129.99 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070015K
isbn: 36070015K
upc:

Start of page
American Trail Products Rear Grab Handles (Orange) - 36070015O

American Trail Products Rear Grab Handles (Orange) - 36070015O
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Interior Fittings
ATG_SKU_4WD_data_feed
Description : Color: Orange;Manufactured and designed in the U.S.A.;Product is engineered to fit the Jeep JK and JKU 2007 - 2018;ATP Grab Handles are manufactured from 6061-T6 aluminum;Interior Grab Handles are anodized Class 2 Mil Spec coating;Stainless hardware included;Rear Grab handles are sold as a pair;This is a bolt on product, no permanent vehicle modifications required;California Residents: WARNING The billet grab handles, and all other ATP products are designed to meet the performance demands required by off-road enthusiasts in every situation. The ATP Billet Grab Handles are manufactured in the USA with functionality in mind while adding some style to the interior of your Jeep.The rear grab handles are manufactured completely from 6061-T6 Billet Aluminum, and are offered in a variety of anodized colors. The handles are sold in pairs, and can be purchase based on your door configuration.Installation of our handles can be achieved in minutes and only required removal of factory bolts, installing the handles, and securing with supplied stainless hardware. | Orange | |
**** PRICE: 129.99 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070015O
isbn: 36070015O
upc:

Start of page
American Trail Products Rear Grab Handles (Red) - 36070015R

American Trail Products Rear Grab Handles (Red) - 36070015R
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Interior Fittings
ATG_SKU_4WD_data_feed
Description : Color: Red;Manufactured and designed in the U.S.A.;Product is engineered to fit the Jeep JK and JKU 2007 - 2018;ATP Grab Handles are manufactured from 6061-T6 aluminum;Interior Grab Handles are anodized Class 2 Mil Spec coating;Stainless hardware included;Rear Grab handles are sold as a pair;This is a bolt on product, no permanent vehicle modifications required;California Residents: WARNING The billet grab handles, and all other ATP products are designed to meet the performance demands required by off-road enthusiasts in every situation. The ATP Billet Grab Handles are manufactured in the USA with functionality in mind while adding some style to the interior of your Jeep.The rear grab handles are manufactured completely from 6061-T6 Billet Aluminum, and are offered in a variety of anodized colors. The handles are sold in pairs, and can be purchase based on your door configuration.Installation of our handles can be achieved in minutes and only required removal of factory bolts, installing the handles, and securing with supplied stainless hardware. | Red | |
**** PRICE: 129.99 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070015R
isbn: 36070015R
upc:

Start of page
American Trail Products Rear Grab Handles (Silver) - 36070015S

American Trail Products Rear Grab Handles (Silver) - 36070015S
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Interior Fittings
ATG_SKU_4WD_data_feed
Description : Color: Silver;Manufactured and designed in the U.S.A.;Product is engineered to fit the Jeep JK and JKU 2007 - 2018;ATP Grab Handles are manufactured from 6061-T6 aluminum;Interior Grab Handles are anodized Class 2 Mil Spec coating;Stainless hardware included;Rear Grab handles are sold as a pair;This is a bolt on product, no permanent vehicle modifications required;California Residents: WARNING The billet grab handles, and all other ATP products are designed to meet the performance demands required by off-road enthusiasts in every situation. The ATP Billet Grab Handles are manufactured in the USA with functionality in mind while adding some style to the interior of your Jeep.The rear grab handles are manufactured completely from 6061-T6 Billet Aluminum, and are offered in a variety of anodized colors. The handles are sold in pairs, and can be purchase based on your door configuration.Installation of our handles can be achieved in minutes and only required removal of factory bolts, installing the handles, and securing with supplied stainless hardware. | Silver | |
**** PRICE: 129.99 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070015S
isbn: 36070015S
upc:

Start of page
American Trail Products Rear Grab Handles (Gray) - 36070015Y

American Trail Products Rear Grab Handles (Gray) - 36070015Y
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Interior Fittings
ATG_SKU_4WD_data_feed
Description : Color: Gray;Manufactured and designed in the U.S.A.;Product is engineered to fit the Jeep JK and JKU 2007 - 2018;ATP Grab Handles are manufactured from 6061-T6 aluminum;Interior Grab Handles are anodized Class 2 Mil Spec coating;Stainless hardware included;Rear Grab handles are sold as a pair;This is a bolt on product, no permanent vehicle modifications required;California Residents: WARNING The billet grab handles, and all other ATP products are designed to meet the performance demands required by off-road enthusiasts in every situation. The ATP Billet Grab Handles are manufactured in the USA with functionality in mind while adding some style to the interior of your Jeep.The rear grab handles are manufactured completely from 6061-T6 Billet Aluminum, and are offered in a variety of anodized colors. The handles are sold in pairs, and can be purchase based on your door configuration.Installation of our handles can be achieved in minutes and only required removal of factory bolts, installing the handles, and securing with supplied stainless hardware. | Gray | |
**** PRICE: 129.99 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070015Y
isbn: 36070015Y
upc:

Start of page
American Trail Products Footman Loop (Black) - 36070016K

American Trail Products Footman Loop (Black) - 36070016K
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Color: Black;6061 aluminum;Proudly made in the U.S.A;California Residents: WARNING The American Trial Products Footman loop is machined from solid 6061 aluminum, Polished to perfection and then anodized. Adding form and function with some style to your Jeep's hood. All of our products are proudly made in the U.S.A.The ATP Footman loop will fit all models including: JK, JKU, TJ and LJ Wranglers. Our Footman Loop comes in both clear / silver and black anodized for a lasting quality finish. They fit 1997-2006 Jeep TJ's and LJ's, and also the new 2007-2018 Jeep Wrangler JK's and JKU's | | |
**** PRICE: 39.95 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070016K
isbn: 36070016K
upc:

Start of page
American Trail Products Footman Loop (Silver) - 36070016S

American Trail Products Footman Loop (Silver) - 36070016S
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Color: Silver;6061 aluminum;Proudly made in the U.S.A;California Residents: WARNING The American Trial Products Footman loop is machined from solid 6061 aluminum, Polished to perfection and then anodized. Adding form and function with some style to your Jeep's hood. All of our products are proudly made in the U.S.A.The ATP Footman loop will fit all models including: JK, JKU, TJ and LJ Wranglers. Our Footman Loop comes in both clear / silver and black anodized for a lasting quality finish. They fit 1997-2006 Jeep TJ's and LJ's, and also the new 2007-2018 Jeep Wrangler JK's and JKU's. | | |
**** PRICE: 39.95 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070016S
isbn: 36070016S
upc:

Start of page
American Trail Products Billet Footman Loop and Hood Snub Delete (Black) - 36070017K

American Trail Products Billet Footman Loop and Hood Snub Delete (Black) - 36070017K
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Black;6061 aluminum;Polished and anodized;Adding form and function with some style to your Jeep's hood;California Residents: WARNING The American Trial Products Black Footman loop is machined from solid 6061 aluminum, polished to perfection and then anodized. Adding form and function with some style to your Jeep's hood. All of our products are proudly made in the U.S.A. The ATP Footman loop will fit all models including; JK, JKU, TJ and LJ Wranglers. Our Footman Loop comes in both clear / silver and black anodized for a lasting quality finish. They fit 1997-2006 Jeep TJ's and LJ's, and also the new 2007-2016 Jeep Wrangler JK's and JKU's. | | |
**** PRICE: 59.95 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070017K
isbn: 36070017K
upc:

Start of page
American Trail Products Billet Footman Loop and Hood Snub Delete (Silver) - 36070017S

American Trail Products Billet Footman Loop and Hood Snub Delete (Silver) - 36070017S
Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
ATG_SKU_4WD_data_feed
Description : Silver;6061 aluminum;Polished and anodized;Adding form and function with some style to your Jeep's hood;California Residents: WARNING The American Trial Products Footman loop is machined from solid 6061 aluminum, polished to perfection and then anodized. Adding form and function with some style to your Jeep's hood. All of our products are proudly made in the U.S.A. The ATP Footman loop will fit all models including; JK, JKU, TJ and LJ Wranglers. Our Footman Loop comes in both clear / silver and black anodized for a lasting quality finish. They fit 1997-2006 Jeep TJ's and LJ's, and also the new 2007-2016 Jeep Wrangler JK's and JKU's. | | |
**** PRICE: 59.95 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36070017S
isbn: 36070017S
upc:

Start of page
American Trail Products Exhaust Spacer - 36120001

American Trail Products Exhaust Spacer - 36120001
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : CNC machined for a perfect fit;Includes all necessary hardware and instructions;Bolt-on installation;California Residents: WARNING American Trail Products exhaust spacer kit for all 2012-UP JK Wranglers that have a lift kit with 2.0 or higher lift. These exhaust down pipe spacers are installed between the driver and passenger head pipe flanges and the flanges of the cross pipe. This moves the exhaust cross pipe down and back to provide clearance with the cross-member. This prevents contact between the front driveshaft and the exhaust cross pipe during suspension down travel. | | |
**** PRICE: 69.95 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36120001
isbn: 36120001
upc:

Start of page
American Trail Products D-Ring Shackle Tab DIY Weld-On Mount - 36120011

American Trail Products D-Ring Shackle Tab DIY Weld-On Mount - 36120011
Business & Industrial > Material Handling > Lifts & Hoists > Winches
ATG_SKU_4WD_data_feed
Description : D-ring shackle tab DIY weld-on mount;1 thick plate steel;Sold as a pair;California Residents: WARNING The American Trail Products D-Ring Shackle Tab DIY Weld on mount allows fabricators to easily add a super-tough recovery attachment point to any structural member of the vehicle. The ATP Shackle Tabs are CNC machined from 1 inch thick plate steel, these Shackle Tabs feature chamfered edges for maximum weld penetration and a quality, finished appearance. The tab is specifically designed to accept a 3/4 inch D-ring shackle. | | |
**** PRICE: 45.95 USD
Manufacturer : American Trail Products
Tags: - .
SKU: A-T36120011
isbn: 36120011
upc:

Start of page

 

www.sapiensman.com

 

 

 


Back to Top BACK TO TOP

a zx7 - az x7 - azx 7 - azx7 - a zx7 - az x7 - azx 7 - azx7